Please help!! I have NO sound!!
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: home of the big chrome wheel homies
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Please help!! I have NO sound!!
I finally got a new head unit after having all the other necessary hardware for months and got no sound after putting it in. I checked all of the fuses and all of the wires only to find nothing wrong that I could see. The power is fine because the unit works and the darn power antenna even works, but NO SOUND!!!!!!! Please help me troubleshoot!!
#3
thats not paint....
I had that same problem.... 94 Touring w Bose. I took it to a BestBuy and they said it was just a wire missing out of the harness?? I dont know how true that was but it works now. Maybe it was the wire to turn the external bose amp on.
#4
Full Member
Thread Starter
Join Date: Mar 2001
Location: home of the big chrome wheel homies
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Finally!! It took me forever to get logged back into the forum for some reason. Anyway.......yeah, '93 with the P.O.S. Bose crap. Thanks for sharing 7-sins. It has to be something like what happened to you because I checked the wires a thousand times and I don't see anything wired incorrectly. I was sure to make special connections like others have told me to as well. All my fuses are still fine too. I guess I'll go get help tomorrow. I'm usually a do-it-yourself guy when it comes to car audio, but I'm totally stumped this time. I didn't even have this much trouble when I hooked up a bunch of stuff on my old talon. At least then I figured things out after using trial and error and at most lost a couple of hours fooling around. Ok, hopefully I can get things straightened out tomorrow. I'll report back on how it went.
#5
Full Member
Join Date: Oct 2001
Location: Queens, NY
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
your new headunit might be blown..
i bought a new Kenwood KDC-9017 .. the EQ and everything worked.. it received sound from CDs, FM/AM but no sound came out. they said that the unit might be blown.
try putting a different unit and see if the sound comes out.
good luck.
i bought a new Kenwood KDC-9017 .. the EQ and everything worked.. it received sound from CDs, FM/AM but no sound came out. they said that the unit might be blown.
try putting a different unit and see if the sound comes out.
good luck.
#6
It's never fast enough...
Join Date: Feb 2001
Location: Miami - Given 1st place as the POOREST city in the US as per the federal government
Posts: 3,760
Likes: 0
Received 3 Likes
on
3 Posts
Hope this helps
https://www.rx7club.com/forum/showth...threadid=42023
https://www.rx7club.com/forum/showth...threadid=42023
Thread
Thread Starter
Forum
Replies
Last Post