NRG HUB and SParco Wheel Problem
#1
Junior Member
Thread Starter
NRG HUB and SParco Wheel Problem
Have a small problem with a NRG Wheel Adapter and Sparco Wheel I bought. Everything has installed fine, but the steering shaft is a tad long it seems, and when the wheel is put on the horn button can't snap on. Any ideas? Here is the hub and wheel I bought:
http://www.andysautosport.com/produc..._srk-160h.html
http://www.andysautosport.com/produc...5TRGL1TUV.html
http://www.andysautosport.com/produc..._srk-160h.html
http://www.andysautosport.com/produc...5TRGL1TUV.html
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
you could try something like this:http://www.ebay.com/itm/like/172458966759?vectorid=229466&lgeo=1&item=172458966759&rmvSB=trueIt will bring the wheel out from the hub a bit so you can attach the horn button.
Another alternative is to cut the shaft at the top a little bit,just enough so that you can get the thing on..That is IF you are going to keep it long term.
Another alternative is to cut the shaft at the top a little bit,just enough so that you can get the thing on..That is IF you are going to keep it long term.