need help with bazooka tube bta6100
#1
need help with bazooka tube bta6100
my bazooka tube just all the sudden turned off yesterday on the freeyway. i just checked the wireing today, and everything seems fine, no fuses blown. but i found out, im not getting power to my bazooka tube, or theres just no power from it.
from what they told me, if its blown, it should at least make some noise right? well it has no power whatsoever. its the bazooka tube with a built in amp. my speakers, and headunit still works fine, but the sub just wont turn on anymore. what you guys think is the problem?
from what they told me, if its blown, it should at least make some noise right? well it has no power whatsoever. its the bazooka tube with a built in amp. my speakers, and headunit still works fine, but the sub just wont turn on anymore. what you guys think is the problem?
#2
Zombie Response Team
Join Date: May 2007
Location: Warsaw, Indiana
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
It sounds like your remote wire is bad. This is the wire that turns the amp on and off when it detects that the head unit is on. What you need to do is get a volt meter and check that that your getting power from the battery and then check w/ the head unit on that the remote wire is getting power. If either of those is not getting 12volts then thats the problem. Also check your ground if none of those are the problem I would have to say the amp is bad. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM