Originally Posted by Julian
(Post 8598682)
Now I would not call my 1/4" (max depth) by about 1.5" long slice a "cut off the shoulder support". Also, if I was to do it again .. i.e. build new base, I would have set seat off centerline of OE base by 3/8" or so towards ceter of car. I have a slight gap to center tunnel.
I agree with a three part list and some description of mod Great idea for a thread though, hopefully you guys can get some good information compiled and put together! should be FAQ worthy when it's done! |
the Zeta III is FIA , the sport one is not.
|
Do the pole positions work? I like that they come in leather.
|
this is a great idea! exactly what the forum needs. I think the three categories sounds good. hopefully someone has had experience with the F1Spec seats. the thread in the interior forum wasn't very useful.
|
Will fit
1. Stock FD Seats 2. Recaros from the Spirt R 3. Gias Lowmax 4. Bride Zeta III 5. Bride Vios III lowmax 6. Mazdaspeed Type-F 7. Memoryfab s58 8. Corbeau - some models, they supply the custom racks. 9. Cobra Imola (with some minor triming of door side shoulder wing) 10. Sparco Sprint V 11. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine) Will fit with modifications 1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD 2. Sparco Evo 2 - - fits with seat modification. 3. Rx-8 seats (can be made to fit by modifying the racks) Will NOT fit 1. Sparco Fighter 2. Sparco Torino 2 |
Will fit
1. Stock FD Seats 2. Recaros from the Spirt R 3. Gias Lowmax 4. Bride Zeta III 5. Bride Vios III lowmax 6. Mazdaspeed Type-F 7. Memoryfab s58 8. Corbeau - some models, they supply the custom racks. 9. Sparco Sprint V 10. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine) Will fit with modifications 1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD 2. Sparco Evo 2 - - fits with seat modification. 3. Rx-8 seats (can be made to fit by modifying the racks) 4.Cobra Imola (with some minor triming of door side shoulder wing) Will NOT fit 1. Sparco Fighter 2. Sparco Torino 2 moved Cobra Imolas as trimming is a modification |
anyone know about the reactive seats? I can get them super cheap, and a friend has had them in his de for just under 2 years and they still look brand new... His car is not an fd, just an 02 civic sir. I would like to get a set into my fd.
|
btw the part numbers are 72010 red, and 72030 black.
|
Isn't there a mod guide for the Torinos?
|
anyone know about memory fab s68?
|
Good info!
|
Originally Posted by Chris_72
(Post 8606201)
anyone know about the reactive seats?
Most manufactures post their dimensions like this: http://www.sparcousa.com/resourceFiles/26.pdf http://www.corbeau.com/product_images/a4/black/A4-L.gif |
Would RHD stock FD seats fit the LHD with out any modification?
|
Originally Posted by mr.zoom
(Post 8629302)
Would RHD stock FD seats fit the LHD with out any modification?
Yes |
I have rhd stock fd seats if that question wasmore then a curiosity.
if your just looking for my passanger so you can swap out your worn drivers seat that works two. the more parts that go missing in my rebuild the more excuse i have to buy new parts. |
heres a vid from Team Orange in japan. Asamoto is in the FD and sitting in a seat that looks like the Bride Gardis III. i read the specs on the seat and its big as hell but i guesse it fits...
he starts at 6:26 http://www.youtube.com/watch?v=8sR6v4-Ggt4 |
does anyone know the dimensions of the stock seats off hand? i'm too lazy to go measure right now.
|
sweet video, if anybody has the bride zeta III in their fd could u please post pics, also i would imagine its a pain to get in and out of most of these seats
|
Will fit
1. Stock FD Seats 2. Recaros from the Spirt R 3. Gias Lowmax 4. Bride Zeta III 5. Bride Vios III lowmax 6. Mazdaspeed Type-F 7. Memoryfab s58 8. Corbeau - some models, they supply the custom racks. 9. Sparco Sprint V 10. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine) 11. Sparco Roadster Will fit with modifications 1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD 2. Sparco Evo 2 - - fits with seat modification. 3. Rx-8 seats (can be made to fit by modifying the racks) 4.Cobra Imola (with some minor triming of door side shoulder wing) Will NOT fit 1. Sparco Fighter 2. Sparco Torino 2 |
Can you guys post pics of the seats? Makes it easier for searching and for us lazy people :)
Thanks |
I would really like to see some Recaro Pole positions in an FD. I think they would be the closest thing to an RZ seat, plus they come in alcantara.
|
So which aftermarket seats that are reclinable fit in the fd? anyone?
|
gias
|
any info about the Bride cugas fitting in the Fd?
|
Will fit
1. Stock FD Seats (does this really need to be on the list?) 2. Recaros from the Spirt R 3. Gias Lowmax 4. Bride Zeta III 5. Bride Vios III lowmax 6. Mazdaspeed Type-F 7. Memoryfab s58 8. Corbeau - some models, they supply the custom racks. 9. Sparco Sprint V 10. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine) 11. Sparco Roadster 12. Sparco EVO with stock seat rail (shoulder bolster will rub on the door) Will fit with modifications 1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD 2. Sparco Evo 2 - - fits with seat modification. 3. Rx-8 seats (can be made to fit by modifying the racks) 4.Cobra Imola (with some minor triming of door side shoulder wing) Will NOT fit 1. Sparco Fighter 2. Sparco Torino 2 |
All times are GMT -5. The time now is 11:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands