Originally Posted by Kaizenru3
(Post 12576437)
my plan was the Sendai model since the shoulders are narrower was going to mix it with either the feed slide rails since they look to be a fairly shallow slide system compaired to bride or I’ll go fixed and go with street faction mounts. Honestly not to concerned with if my seat moves or not. Once it’s in place I never mess with it.
|
Originally Posted by Valkyrie
(Post 12576453)
don’t buy anything until you know the mounting width of the seat is narrow enough for the rails. Typically it has to be under 400 mm.
definitely will! |
Originally Posted by Valkyrie
(Post 12576453)
don’t buy anything until you know the mounting width of the seat is narrow enough for the rails. Typically it has to be under 400 mm.
interested in these seats as the lrice is great and its fia certified. 400mm exact width as per their website. |
Originally Posted by Ls3rx-7
(Post 12576960)
interested in these seats as the lrice is great and its fia certified. 400mm exact width as per their website.
|
So I know the Sparco Evo QRT fits in the car but does anyone have any suggestions for what rails to get? I'm 6'1 with longer legs. I do plan on bringing the steering wheel closer to me, but looking to see what you guys suggest on getting for rails.
|
Originally Posted by madhat1111
(Post 12576167)
I found this quote by searching this thread. First result.
Sparco R100's fit without modification. Very light touching on the door cards, not much though. Used Planted seat brackets and Sparco rails. -Geoff |
PSA: don’t buy the Kawai Works super low seat rails if you are taller than about 5’9” or 5’10”, it’s designed for short bastards and doesn’t go far back enough.
|
I’m looking at this seat from bridgemoto, I attached a picture of the specs. Seem to be pretty close to brides Edirb but I’m having trouble finding rails that will fit and make sure I can use my factory door panels without modifying the seat, and will drop the seat an inch or two
https://cimg4.ibsrv.net/gimg/www.rx7...6303e305a.jpeg https://cimg7.ibsrv.net/gimg/www.rx7...99903c5b00.png |
Bridgemoto XL bucket seat with Ronin rails fits perfect. I’m 6ft 230lbs modified the rails so seat sits as far back as possible. Can get in and out of the car easily even without removing my steering wheel. Just ever so slightly touches the door panel but that may be me needing to readjust the rails. I feel like I’m sitting a little crooked.
https://cimg5.ibsrv.net/gimg/www.rx7...6441db706.jpeg https://cimg6.ibsrv.net/gimg/www.rx7...9e81d586a.jpeg https://cimg7.ibsrv.net/gimg/www.rx7...8d57e20a1.jpeg https://cimg8.ibsrv.net/gimg/www.rx7...2d6a20388.jpeg |
Originally Posted by Kaizenru3
(Post 12592621)
Bridgemoto XL bucket seat with Ronin rails fits perfect. I’m 6ft 230lbs modified the rails so seat sits as far back as possible. Can get in and out of the car easily even without removing my steering wheel. Just ever so slightly touches the door panel but that may be me needing to readjust the rails. I feel like I’m sitting a little crooked.
|
Originally Posted by Robby_94
(Post 12593545)
How does head clearance feel vs stock?
much better. Stock seat my head was basically touching the roof probably gained 2-3” if I had to guess |
All times are GMT -5. The time now is 02:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands