Just received Sparco Torino seats.. but
#1
Just received Sparco Torino seats.. but
I've done some research that i need custom braket (universal braket) from sparco but is anybody tried to modify stock braket to make it work? Please help!! I can't wait to put them in my car
thanks
thanks
#3
just something I didn't add to my site yet...
there is another forum member that followed my instructions, but went a little further to get more room.
he cut out the side panels to fit the adjustment ***** for better clearance...
do a search on torinos... you should find it...
good luck
there is another forum member that followed my instructions, but went a little further to get more room.
he cut out the side panels to fit the adjustment ***** for better clearance...
do a search on torinos... you should find it...
good luck
#4
Senior Member
Join Date: Oct 2001
Location: San Antonio TX
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
You don't have to cut the panels to get them to fit, you can use a heat gun and bend them in...but like JSpecRZ said...if you want the adjustment *****...you'll have to cut.
#5
Senior Member
Can anyone rehost this walk thru again please?
just something I didn't add to my site yet...
there is another forum member that followed my instructions, but went a little further to get more room.
he cut out the side panels to fit the adjustment ***** for better clearance...
do a search on torinos... you should find it...
good luck
there is another forum member that followed my instructions, but went a little further to get more room.
he cut out the side panels to fit the adjustment ***** for better clearance...
do a search on torinos... you should find it...
good luck
Thread
Thread Starter
Forum
Replies
Last Post