hvac relocation panels
#1
Full Member
Thread Starter
Join Date: May 2001
Location: LA,CA,USA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
hvac relocation panels
I finally found an hva/c panel at a decent price so i can start on the relocation project. Since time isn't an issue I was thinking of having copies made if it comes out really good. Does anyone have any info on where i could go to research this? Any places/people that i can talk with?
Thanks in advance,
`s
Thanks in advance,
`s
#3
Full Member
Thread Starter
Join Date: May 2001
Location: LA,CA,USA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I've contacted someone that is interested in helping with the fabricating of the panels. I'm currently trying to work out a budget as well as final placement. The one thing that I have found that may be the thing that will prevent the project from taking off is the dial displays (the little function icons on the selector dials, as well as the blue to red sweep for the temp). This is no problem if you are grafting the pieces from one panel to another, but to duplicating them from scratch is a different story.
Again if anyone can offer up some input on what they would do differently if they had to do it again, as well as posting some pics of thier relocations, I would greately appreciate it.
`s
Again if anyone can offer up some input on what they would do differently if they had to do it again, as well as posting some pics of thier relocations, I would greately appreciate it.
`s
#4
I did this almost 2 years ago.. i just repainted it w/ textured coating.. here is an old pic
Here is some info on doing this...
http://www.efini.net/dash1.htm
Here is some info on doing this...
http://www.efini.net/dash1.htm
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM