how to remove panel
#2
Rotary Freak
Join Date: Aug 2003
Location: Toronto
Posts: 1,790
Likes: 0
Received 0 Likes
on
0 Posts
Its self explanatory.....ill try to my best from remebering try it and you should be ok though.
Remove the shifter sorrouns (rubber part around the boot) it just pops off so pry it with a screwdriver.
Remove ashtry (just pulls out)
Remove the vents on the top (two vents but one peice) just pulls out
With those out you should have exposed a bunch of screws, undo the ones that seem neccesary and dont forget the two were u pulled the vents from.
That should get you somewere, maybe you can figure out the rest as you go along
Remove the shifter sorrouns (rubber part around the boot) it just pops off so pry it with a screwdriver.
Remove ashtry (just pulls out)
Remove the vents on the top (two vents but one peice) just pulls out
With those out you should have exposed a bunch of screws, undo the ones that seem neccesary and dont forget the two were u pulled the vents from.
That should get you somewere, maybe you can figure out the rest as you go along
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM