Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Help with factory 2nd gen tape deck

Thread Tools
 
Search this Thread
 
Old Feb 16, 2009 | 06:57 AM
  #1  
watindes's Avatar
Thread Starter
magic spinning triangles!
 
Joined: Dec 2008
Posts: 59
Likes: 0
From: Richmond
Help with factory 2nd gen tape deck

I just got this and I need to know which connectors in the back of the radio are (+) and (-). I have all of the factory connectors these just seem to be disconnected and what colors the wires from the car are positive and ground, I was told solid blue and black?

Thanks

Jesse
Reply
Old Feb 16, 2009 | 07:52 AM
  #2  
watindes's Avatar
Thread Starter
magic spinning triangles!
 
Joined: Dec 2008
Posts: 59
Likes: 0
From: Richmond
Played with it a little and with everything disconnected (no radio in at all) I found the 20 AMP audio fuse was blown, I put in a new one and that instantly fried. Any ideas on where I could start looking for this electrical gremlin. There are a few loose wires (3 to be exact) where my radio goes with no factory connectors attached to them, two are bundled together (black and yellow?) and i did not separate them before I tried my last 20 amp fuse, do any of these colors have power going through them, I know black is usually ground but I thought the power antenna was the ground source.

Please help, I miss my music,

Jesse
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM




All times are GMT -5. The time now is 04:08 AM.