Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Feed style side skirt

Thread Tools
 
Search this Thread
 
Old Nov 21, 2017 | 08:14 AM
  #1  
HKRotary's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Oct 2017
Posts: 3
Likes: 0
From: Hong Kong
Feed style side skirt

Do I need to drill holes to install the feed style skirt, what are my options.


Reply
Old Nov 21, 2017 | 08:48 AM
  #2  
Mikelivi91's Avatar
Senior Member
iTrader: (1)
 
Joined: May 2017
Posts: 258
Likes: 27
From: Youngstown, OH
3M double sided tape with some self taping screws do the trick. Make sure to use washers on the screws to gain more surface area to grab and hold...

GL
Mike
Reply
Old Nov 22, 2017 | 10:52 AM
  #3  
zyph3r's Avatar
Full Member
Tenured Member: 15 Years
 
Joined: May 2010
Posts: 132
Likes: 0
From: Calgary
mine are on using 4 self tappers with washers on each side of the car. the two on each end are ~6" from the end of the side skirt the two in the middle are evenly spaced in between.
Reply




All times are GMT -5. The time now is 12:13 AM.