FD Front Speaker Install: Has anybody tried this?
#1
Full Member
Thread Starter
Join Date: Dec 2001
Location: Atlanta, GA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
FD Front Speaker Install: Has anybody tried this?
I' got rid of my bose system. I found some rear brackets to fit 5x7s but finding brackets for the front is nearly impossible. I'm planning to put 5.25 components. I found a good Audiobahn set that the mounting depth is pretty shallow @ 1 and 7/8 depth. Now, I am finding a way of mounting them to the front. While searching, I found this. The idea is not bad. I'm wondering if anybody has tried it this way. List the good and bad please. Here's the link
http://www.rx7city.com/93_speakerinstall.htm
Thanks,
Jason
http://www.rx7city.com/93_speakerinstall.htm
Thanks,
Jason
#5
White chicks > *
iTrader: (33)
well im getting some pioneer speakers in about a week for the front and back
6x8 in the back and 5.25 in the front, the place i order it from gives free wiring to wire to factory harnesses and instructions and mounting brackets if necessary.
so hopefully this job will be easy, so far, ive done all my past electrical work and some were pretty hard, this shouldnt be
6x8 in the back and 5.25 in the front, the place i order it from gives free wiring to wire to factory harnesses and instructions and mounting brackets if necessary.
so hopefully this job will be easy, so far, ive done all my past electrical work and some were pretty hard, this shouldnt be