|
did some one say kevlar?
http://tinypic.com/4bel1mw http://tinypic.com/4cmrneb http://tinypic.com/2cg1lrp http://tinypic.com/2z4eej7 http://tinypic.com/2eceqvn http://tinypic.com/2d8qu1c http://tinypic.com/4gflws7 http://tinypic.com/2ry53ti http://tinypic.com/42k2ra1 http://tinypic.com/2lnvasm http://tinypic.com/2prhb8l http://tinypic.com/29cp1g1 |
Wow Hey man any deals for christmas for us? Im tryin to hint to my gf what i want for christmas i even left your ebay page open on my comp so she could see it!
I will pm you my details |
Those look pretty good. Ill wait and see how well they fit before i get to interested. Is there any price change for the red ones?
|
Will someone please try these in an FD already!! There has to be someone in the SF area!
|
2 plus months without an FD fitting...definitely missing a lot of orders. I dont know why you wouldnt try to get them test fitted??????????????????
|
Originally Posted by TonyG2
2 plus months without an FD fitting...definitely missing a lot of orders. I dont know why you wouldnt try to get them test fitted??????????????????
|
Originally Posted by Mahjik
He's trying. He's asking for someone in the area to bring their car to his shop but no one is responding. However, if the measurements are correct the Type III's will be the only ones to fit in the FD. The dimensions show that it should fit quite nicely.
|
Originally Posted by Tranquil
How much smaller is the FD interior compared to the FB? The Type II seats fit inside of the FB quite perfectly, in my opinion.
|
Originally Posted by Mahjik
He's trying. He's asking for someone in the area to bring their car to his shop but no one is responding. However, if the measurements are correct the Type III's will be the only ones to fit in the FD. The dimensions show that it should fit quite nicely.
|
nah i think they want someone to buy their seats and then try them out and tell everyone if they fit or not vs someone bring it to there warehouse ( i offered and they told me it's in colma and thats it)
|
hmm well maybe if the offered a full refund if they didnt fit...
|
i would give a discount to the person who wants to try out our seats in the fd . most likely cost pirce of the seat
|
I'm all over this then. I'll be calling you Monday.
Edited to add that I'll be trying the Type 2's, I think I can fit'em. :) |
e-mail sent
|
how much is the cost of the seats? I am in SF, well in fremont for school right now, but yeah. Let me know.
p.s. i can try to fit em =) for a lower price or just the cost of the seats depending on the price xD |
i canot disclose the cost of the seats to the public. but we arer working with a a fd owner in the bay area right now.
|
Originally Posted by f1spec
but we arer working with a a fd owner in the bay area right now.
|
Originally Posted by f1spec
i canot disclose the cost of the seats to the public. but we arer working with a a fd owner in the bay area right now.
|
yes i have the type 3's in stock
|
any updates on the FD fitment?
|
sorry there is no update on it yet. the guy we used s busy with finals and work
|
Winter special! all sales will be 10% off and there will be no tax (so around 20 percent off) for the winter special until january 1st, 2007
|
all pms have been replied to
|
so whats the final price for 2 of them than? with the discount?
|
Originally Posted by wan
any updates on the FD fitment?
|
sorry about the late response about the fd fitment,. but we are still working on that and getting ready for the TAS.
|
I was FINALLY able to install the seat I bought at Christmas after waiting 4 weeks for Wedge Engineering to send my the brackets I ordered, and it turns out that the headroom is WORSE than stock if you use the sliders they provide...
Which don't have the same bolt hole positions as the Sparco sliders, despite the fact that I was guaranteed they would... soooo... I had to drill up the 110-dollar WE brackets to make the sliders (which are too damn thick) fit... I guess I could try the Bride rails, but I get the feeling they aren't any better. The stock sliders are fairly thin, but the mounting surface on the top wasn't flat, so I can't bolt them up to the side mounts without taking a dremel to them. Otherwise, the seat's quality isn't bad, but be careful on how you spend your money trying to install them... I thought about just bolting them straight to the WE brackets, but I'm gonna have to widen one of the holes on the side mount (I need another 2mm or so of room)... and I really don't want a seat that can't move... |
Pictures?
|
Yes pics would be nice please
|
I already put my stock seat back.
I'm gonna get some Bride FG rails... I think they're designed to let the seat sit *between* the sliders and the sidemounts instead of *on top* of them, so theoretically you should be able to get just as much headroom as having it mounted to the floor (not the floor directly, but to the two crossmembers)... so long as nothing keeps the seat from going into the bottom setting. Although, if anyone wants a seat bracket they can drill up to make an adjustable but non-sliding seat base, I'd sell my WE bracket for a good price... it would be useful so long as you're looking for a fixed seat base, and have some drill bits and taps for hardened steel. The seat itself looks just like their pictures, except it has the F1Spec badge on the front cushion (...kind of wish it didn't). Also, they say they can get Bride FG rails for 150, which is a bit cheaper than other places in the US (although they cost 130 in Japan... and hopefully I'll be IN Japan in a few months). |
so they do fit in the fd. I plan on buying these seats so what rails do you recomend than? Im pretty short guy 5.5-5.6 so i dont mind the seat sitting a lil higher, just nothing lower than stock.
|
Bump
Any one got pics of these installed? |
Updates on FD Fitment or is this dead? Did this company fall by the ways side already.
|
I see them on eBay, but I dont know why this company wouldnt have info for FDs with some pics...thats really not a lot to ask.
|
anyone try out the reclineable f1 spec seats in their fd?
|
|
Thanks for that picture but that doesnt show that it actually fits on a 100% street car. The owner of the car says he doesnt have door panels installed so he doesnt know if it will fit properly on a car that has them. While the picture shows that the seat is actually installed, it doesnt guarantee us that it will fit with the door panel in place.
Heres a link to his thread: https://www.rx7club.com/interior-exterior-audio-26/my-fd-f1spec-gias-reclineable-seat-671937/ |
Originally Posted by wan
(Post 7156193)
Thanks for that picture but that doesnt show that it actually fits on a 100% street car. The owner of the car says he doesnt have door panels installed so he doesnt know if it will fit properly on a car that has them. While the picture shows that the seat is actually installed, it doesnt guarantee us that it will fit with the door panel in place.
Heres a link to his thread: https://www.rx7club.com/showthread.php?t=671937 |
|
Is that seat all the way back in those pictures? It looks like its pulled forward to where someone like myself at 5'6" with short legs would sit.
Jack |
Yes, the seats are pulled forward (They can pull forward a little more). I'm about your height.
|
How does it fit with the seat all the way to the back? I'm pretty tall at 6' 4" and I usually slide my stock seat all the way back and then 2-3 clicks forward. The last picture gives the illusion that the seat wont fit if it's slid back. Is this correct?
|
the seat is actually pushed up so you would have more space for it in the back
|
Originally Posted by f1spec
(Post 7234905)
the seat is actually pushed up so you would have more space for it in the back
|
Originally Posted by XxMerlinxX
(Post 7235352)
No, it'd be the opposite. My car's not with me at the moment, but IIRC, the cockpit kind of slopes backwards, meaning you have less space for a seat the farther back it gets pushed. So if a taller person had those seats and they needed to have them pushed back, they'd probably rub the door panel. Just to confirm that, we should ask the person who posted those pictures since it's one of the members on here.
|
Oh good. I couldn't remember whose car that was.
|
he has updated the pics
|
who has the case of the mondays
|
ttt
|
| All times are GMT -5. The time now is 04:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands