Thumbs up for F1spec customer service. They called me today to confirm my credit card because it didn't match up. Of course as long as they get their money, what do they care, right? But I still think it was good of them to make sure I wasn't getting ripped off, or ripping someone off.
Also, at the same time they gave me an estimate of 4 business days to Ohio. So hopefully on Tuesday, halloween, I'll be installing a seat before I go out Trick-or-Treating. |
Ttt
|
Waiting for pm reply........
|
repied to
|
i got a seat from them, type 2.
was able to use the provided slides and mounts in an FB driver side. had to change up the mounting a bit, some drilling required but really no big deal at all. seat has very nice lateral and shoulder support, also the back is in the natural driving position. padding is a little on the thin side, so make sure you take everything out of your pockets if you plan on doing any brisk driving ;) |
I have to do that with the stock seats anyway :p
|
Originally Posted by FBDrifter
i got a seat from them, type 2.
was able to use the provided slides and mounts in an FB driver side. had to change up the mounting a bit, some drilling required but really no big deal at all. seat has very nice lateral and shoulder support, also the back is in the natural driving position. padding is a little on the thin side, so make sure you take everything out of your pockets if you plan on doing any brisk driving ;) |
i didnt take pics during the mounting, i can describe it though. for the rear i used a nut/bolt through the top of the stock mount. for the front i used a 2 1/2" bolt and went all the way through the floor with a bolt and washer underneath.
i will get some pics of it in the car tomorrow. |
and here are pics..i cant get any good ones, theres a jeep parked 4 inches away from my door :(
it took me around 15 mins and a trip to ace to get it to fit very nicely in a 1st gen. http://memimage.cardomain.net/member...08_71_full.jpg http://memimage.cardomain.net/member...08_72_full.jpg |
I, too will have my installation pics very shortly.
Although I'm waiting on an email response on order yhst-76493336636070-537 from f1spec.com on missing sidemounts/sliders |
Got a response. Now I just have to wait for them in the mail.
|
pm me a price for the Type 3 in carbon and one in fiberglass
|
Ttt
|
whos wants these seats =D
|
seats
how much interested
|
Originally Posted by f1spec
whos wants these seats =D
|
I'll consider getting a Type 3 in fiberglass (don't have the money to spend on CF or carbon-kevlar, as much as I'd like them) once I have that kind of money to spend (in a few weeks)... assuming I can fix my other problems first.
I figure I could use your side mounts, combined with Wedge Engineering brackets, and Sparco sliders... if that combo would actually be lower than stock at least. |
can you pm me with price for a type 3 in fiberglass
|
Link to my review and installation.
https://www.rx7club.com/interior-exterior-audio-26/installation-f1spec-racing-bucket-595368/ |
can i get a price check on type 2 in fiberglass and if possible picked up?
|
ttt
|
im looking at either the type 1 or type 2 in fiberglass. if possible can i pick up?
|
Once i see some one install them in to a FD. Then i will be willing to buy but untill then my money stays in my pocket. I hope they fit in a FD because i like them. However, like them as i may but if they dont fit they are useless. :)
|
anyone wanna test these seats out in a fd?
|
I will. But I'm in Pittsburgh, PA.
|
Originally Posted by f1spec
anyone wanna test these seats out in a fd?
|
I already sent a PM asking for a discount on them for the same deal, but no dice.
|
Originally Posted by f1spec
anyone wanna test these seats out in a fd?
|
upppp
|
What's the word on these fitting in an FD?
|
Originally Posted by XxMerlinxX
What's the word on these fitting in an FD?
well some one need to try it out . into their fd |
im only an hour away but my car isnt running :(
|
Originally Posted by XxMerlinxX
I already sent a PM asking for a discount on them for the same deal, but no dice.
So come on F1SPEC, a small discount or paying return shipping if they don't fit ,is a small price to pay for what looks to be a lot of possible customers. |
i wouldn't mind if u used my fd to test fit the seat, and i live in sf too
|
Originally Posted by f1spec
\
well some one need to try it out . into their fd |
I have one of the spoon replica F1 seats in my FC and the seat can be mounted very low, its excellent for headroom. I recommend using their sidemounts and bolting them to your existing stock sliders and possibly modifying the stock sliders to sit even lower.
I used the F1 sliders and they only lock on one side and the seat moves a little on the sliders during hard braking and launches... I will mod the stock sliders when I get a chance. oh yeah the seat is very wide compared to a real deal spoon seat! wow! but its roomy and comfortable. the fabric seems durable and the seat shape is very comfortable. I've driven in a Sparco Ultra, Recaro SRD and a Momo Start for comparison. the oval plastic pieces that surround the harness holes on my seat are a little wimpy and bend inwards on their long edge allowing the seat fabric to lift up and look goofy in the 5th harness slot. if you need an FIA apporved seat you are better off going with a Momo Start seat that is the same weight, same cost and even stiffer yet has FIA appproval. I do not think the spoon style will fit in an FD... but F1specs skinniest seat will most likely fit with ease. |
I wonder how these compare with the Memoryfab seats. I know someone with an FD fit one of theirs in.
|
Originally Posted by fritts
F1SPEC should discount them or at least say they will cover the return shipping as you are putting these in an application that may or may not fit. If they don't fit you would have to either sell the seats (most likely at a loss) or eat the shipping back to them (if they will even let you return them). If F1SPEC wants to sell them they need to make some type of incentive to be the first to try them out and take pictures. I would be interested in them too if they fit well, but I still don't think they will fit very well from their dimensions.
So come on F1SPEC, a small discount or paying return shipping if they don't fit ,is a small price to pay for what looks to be a lot of possible customers. However, I would like to see them test their seats in the FD so everyone would know if they have to create adapters or if some aftermarket rails would work. Corbeau did it to create FD specific FD rails for their seats, but they still don't tell you which seats will or won't fit; you have to look at their dimensions. |
Someone test fit 'em already! From the measurements the type 3 should fit the fd, I will probably have to notch the seats a bit to fit with my door bars though.
Can I get them without the logo? |
Single-locking sliders are a safety hazard...
|
F1Spec is interested in finding out if they fit the FD too. It seems they want to sell here in order to do so they should help the first to test fit them out. Sparco is also not on this forum posting about and trying to find someone to test fit their seats. Any way you look at it they may or may not fit. I don't trust dimensions or weight given by manufacturers. They never seem to be correct or in the correct positions needed for accurate positioning.
Originally Posted by Mahjik
I don't necessarily agree with that. Sparco isn't going to give you return shipping if their seats don't fit. The fact that F1SPEC provided the dimensions of the seats is as much as any other manufacturer does and I don't believe he/they need to go above or beyond what everyone else is doing.
However, I would like to see them test their seats in the FD so everyone would know if they have to create adapters or if some aftermarket rails would work. Corbeau did it to create FD specific FD rails for their seats, but they still don't tell you which seats will or won't fit; you have to look at their dimensions. |
Originally Posted by fritts
F1Spec is interested in finding out if they fit the FD too. It seems they want to sell here in order to do so they should help the first to test fit them out. Sparco is also not on this forum posting about and trying to find someone to test fit their seats. Any way you look at it they may or may not fit.
Originally Posted by fritts
I don't trust dimensions or weight given by manufacturers. They never seem to be correct or in the correct positions needed for accurate positioning.
|
BTW, I'm also curious as to why they have pictures of the seats with double-locking sliders if they actually come with single-locking ones...
|
You say they shouldn't have to because the bigger manufacturers don't, but I think that's why they SHOULD test fit them. It's good business. It's not like we're asking for them for free, but all of the risk shouldn't be put on the consumer either. And apparently it IS fairly hard to find an FD that will drive down to their shop, because it hasn't happened in the past 2 months that they've been advertising here.
|
Originally Posted by XxMerlinxX
You say they shouldn't have to because the bigger manufacturers don't, but I think that's why they SHOULD test fit them.
Originally Posted by XxMerlinxX
And apparently it IS fairly hard to find an FD that will drive down to their shop, because it hasn't happened in the past 2 months that they've been advertising here.
At least me, being a business man, would do that if I was "really" interested in having it done. The simple fact is f1spec is selling these seats to other car owners. Whether or not he sells a ton here isn't that big of a deal. While more sales are always good, he's not going to go out of his/her way to make it happen. If someone contacts him about trying some seats out, he'll do it; but he's not going out and looking for someone. |
if they send me a pair in black for free, i test them, LOL, no charge
|
hmmm . give me a ring. maybe we can work out something
|
or since my car isnt running i could come by and pick one up and try it on my car since like i said im only an hour away :)
|
i would rather try it out inn our warehouse
|
i have a pair in my 240 i love em to death they save my life twice!!!! kept me stationed and didnt move
|
All times are GMT -5. The time now is 06:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands