c west front bumper how low?
#1
Rotary Enthusiast
Thread Starter
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes
on
0 Posts
c west front bumper how low?
Ok guys im thinking of going with a c west front and rear bumper combo and some madaspeed gtc sideskirts.IMO I think it compliments the rx 7 the best but im sure theres other bodukits that do the same.Anyways Ive seen a couple of you sporting the c west stuff and im wondering how much lower the c west front bumper is.Ive taken the small stock bumper add on off because I kept scraping it.Anyhow im just wondering what the ground clearance for the c west bumper is and would getting some 18 inch rims raise the car enough to make the c west bumper hallway practical and not a nightmare to drive.Meaning that id worry about hitting a small dip and destryoing my entire front end.Also what are the c-west bumpers made out of.Polyurethane or fiberglass?Thanx
#2
twinturboteddy ws my idol
Join Date: Feb 2003
Location: Elkton, MD
Posts: 2,347
Likes: 0
Received 0 Likes
on
0 Posts
I think even the real C-west is fiberglass, but strong fiberglass.
If you can't handle stock with the lip, you won't be any better with the C-west.
18's won't raise the car any higher unless you go with a large tire which will affect wheel fitment.
If you can't handle stock with the lip, you won't be any better with the C-west.
18's won't raise the car any higher unless you go with a large tire which will affect wheel fitment.
#3
live fast. die fun.
Join Date: Aug 2002
Location: USA
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AMRAAM4
I think even the real C-west is fiberglass, but strong fiberglass.
If you can't handle stock with the lip, you won't be any better with the C-west.
18's won't raise the car any higher unless you go with a large tire which will affect wheel fitment.
I think even the real C-west is fiberglass, but strong fiberglass.
If you can't handle stock with the lip, you won't be any better with the C-west.
18's won't raise the car any higher unless you go with a large tire which will affect wheel fitment.
#4
Rotary Enthusiast
Thread Starter
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes
on
0 Posts
hmm thanx for the info.Well if it sits just as low i can handle it.But any lower and Im afraid colorado roads will destroy my front end.If it sits just as low as the stock front end I should be ok.
#7
http://www.c-west.co.jp <- there's the website ... i don't know how'd you go about ordering it though.