Cybaster

Hello,
I was wondering where people put their amps in their FCs
looking for pictures

thanks for the help in advance

Jonthan

Mills604

I'm wondering the same thing. I had it on the back of my rear seats but i took out the rear seats and all the carpeting/sound deadening **** in the trunk. I'm in need of ideas where to put it.

emac

try the amps at http://www.41hz.com/. they're really small. you probably already have the amps though.

JABrx7

iTrader: (1)

i put mine under the pasanger seat.

DJ_Merle

iTrader: (6)

I got a sub box in the back, so I put it in behind the box:

JCurry

iTrader: (6)

Put them in the storage bins, its not real difficult to do, so that way your stuff is hidden and if done right, it has a nice clean look to it

Cybaster

the Infinity amps are quite big, so putting it IN the bins seems out of the question....
I see DJ has a infinity (mono amp?) and 2 12" (or they look like 12s) but the box looks HUGE
I have a rear strut bar at the towers,

do any of you guys recommend running sub boxes somewhere, or making a false floor or whatever? (any pictures?)

DJ_Merle

iTrader: (6)

infinity 2 channel with 2 10's

cprx7

I did away with the bins altogether and I built this for the amp out of 1/2" MDF. I am not done yet, but you get the idea.





I even riced it out a bit ;b

Quangg

sweet! i put mines outside the bins in front of the passenger side.

sTaLa

I put my amps in front of the storage bins. There are two bolts under the carpet. I unscrewed them, and fixed an aluminium plate with two longer bolts. Then I fixed the amps on the aluminium plate.
I have some overheaeting concerns with putting the amps under the seats or in the bins.

As for the sub

staticguitar313

iTrader: (2)

when i get around to doing my setup i'll take pics, everything is going to be hidden . . . and the car will have a rear seat . . .

Cybaster

i have a rear strut bar and my infinity 7541a is pretty big... I don't really like to put it behind the seats, so i wonder if i can put it below my rear strut bar

the other question for you guys out there...
did u guys get upgraded alternators for your systems? because it seems like it would draw quite some power and i don't want it to fry my alternator

VacavilleFC

i'm about to take out my rear bins to put in my visonik V800HC, make a shelf all the way across to set it on, then build a fiberglass box to sit over it, with my infinity perfect 12"s and 51/2 component setup. it'd look something like a false backseat made outta fiberglass and subs
. .
|* O O *|
======