99 spec tail light conversion (Help)
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Austin
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
99 spec tail light conversion (Help)
I was wondering if anyone on the forum could explain to me in the simplest of terms, how to convert my stock 93 rx7 tail lights, into the 96 and up, circle tail lights. Thank you.
-Cameron
-Cameron
#2
Famous Taillights
iTrader: (3)
Send them to me, I'll do them. If you want to do them yourself you'll need a compass, Xacto knife, contact paper, flat black spray paint, and some seal all. Use a heat gun or hair dryer to heat the lights to seperate them. Put the knife in the compass and practice cutting circles in the contact paper and the get the size you want. Once you get the size circles you want, put them on the lights how you want them. Spray the lights with the paint, make sure you get enough, test them on your car before removing the contact paper. Once they are good, remove the contact paper, seal the lights up and there ya go. Hope that helps ya man