3rd Gen Indiglow gauges?
09-20-01, 07:52 PM
#1
Full Member
Thread Starter
Join Date: Sep 2001
Location: San Diego, CA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
3rd Gen Indiglow gauges?
does any company make indiglow gauges (that have speedometer,rpms etc..) for 3rd gen Rx-7's? they are white then at night become like a greenish blue indiglow. i know they have them for preludes,civics,integras and eclipses
09-20-01, 10:28 PM
#3
Full Member
Thread Starter
Join Date: Sep 2001
Location: San Diego, CA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
tierrasanta
im right off the 15-N in tierrasanta..its right next to scripps ranch, where you at? and do u go to the races on friday and saturday nights?
09-20-01, 10:40 PM
#4
Old School Member
Join Date: Feb 2001
Location: Vancouver, Wa, USA
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
check out www.blackcatcustom.com
09-23-01, 06:35 PM
#6
Junior Member
Join Date: Mar 2001
Location: Lutz, Fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I emailed black cat customs and they said that there was a group buy trying to get started on the faces for the 3rd gens. just wondering if anyone knows who is putting this together and what price are they getting for them. thanks
Shawn
'93 Silver Base
Shawn
'93 Silver Base
Trending Topics
09-26-01, 10:41 AM
#8
Junior Member
Join Date: Mar 2001
Location: Lutz, Fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
this is what black cat customs sent me.
"There have been a few requests lately for the 3rd gen Rx-7 and one person is
trying to set up a group buy. The normal price for the 3rd Gen RX-7 kit is
$139 which includes the heater control dials. A large color print graphic.
Such as the Mitsubishi logo or the custom print shown on the "Custom"
section of the website typically adds $25, or you can add a small logo, such
as the "RX7 TT" logo as shown in the attached picture for $10 extra. "
they didnt send an attached picture or else i would post that as well. hope this helps.
Shawn
'93 Silver Base
"There have been a few requests lately for the 3rd gen Rx-7 and one person is
trying to set up a group buy. The normal price for the 3rd Gen RX-7 kit is
$139 which includes the heater control dials. A large color print graphic.
Such as the Mitsubishi logo or the custom print shown on the "Custom"
section of the website typically adds $25, or you can add a small logo, such
as the "RX7 TT" logo as shown in the attached picture for $10 extra. "
they didnt send an attached picture or else i would post that as well. hope this helps.
Shawn
'93 Silver Base
09-26-01, 09:13 PM
#10
Full Member
Thread Starter
Join Date: Sep 2001
Location: San Diego, CA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
usually indiglow gauges are white faced in the daytime (when ights arent on) then when u turn your lights on they are indiglow blue or indiglow green, on my friends eclipse he can switch between light blue,blue,bluegreen,light green and green. its pretty sweet its on a little switch that comes with the gauges...they also make them for civics,preludes,some mazdas (newer mx6's) and i think supras too.
09-26-01, 11:40 PM
#11
Junior Member
Join Date: Mar 2001
Location: Lutz, Fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
couple of my friends with mr2's haave those gauges you are talking about BOOSTIN. your friend got them off of ebay right? my friends got theirs off ebay and they look real nice during day and night. the blue looks real nice at night. the maker of those gauges isnt thinking of making a kit for our cars.
Shawn
'93 Silver Base
Shawn
'93 Silver Base
09-27-01, 02:18 AM
#13
Senior Member
Join Date: Mar 2001
Location: SF
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
hehe... u guys don't know what you're getting yourself into with those face gauges. i have nr auto white face gauges on my car and let me just say i will NEVER take that **** apart again. the previous owner installed the gauge faces and the gauges weren't calibrated correctly so i took it all apart to fix it. if u guys have an a-pillar gauge pod, that meter hood will be a bitch to pull out, you might need to remove the gauge pod. anyway, besides the fact that it's a pain in the *** to to take the gauge cluster apart, it's even more of a bitch to re-calibrate the gauges. BOOSTIN, since you're in san diego, i can help you out if you need help. if you wanna see what white face gauges look like email/pm me and you can see them on my car before deciding if it's worth the effort. i'll try to post some pics on here this weekend if i have time.
