Haltech wireing the haltec
12-26-01, 09:36 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
wireing the haltec
i have to rewire my 93 but am also thinking off going with a haltec do i still need to rewire the main wire harness or does the halteck take care off that.
12-26-01, 11:31 PM
#2
Yellow Dragon is no more
You are going to need to make some clarifications on what question you want answered. Are you keeping emissions equipment? What are your mods? There are 2 basic ways to do this conversion. You can piggy back with stock ECU or you can go full stand alone. The answer is in your answer to the above questions.
12-28-01, 07:15 PM
#3
Haltech E6K
Join Date: Feb 2001
Location: Northern California (USA)
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
What spyfish said is correct. If you need to keep ALL of your emissions equipement you need the stock harness. If you think you can pass emissions with just your airpump (which is fairly simple) then you can use the Haltech harness.
If you are asking this question it sounds like you should just replace everything with the stock harness. Then if you want to go Haltech use the plug and play harness.
If you are asking this question it sounds like you should just replace everything with the stock harness. Then if you want to go Haltech use the plug and play harness.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM