Can haltech control water injection?

 

i belive the E11 does

 

So the e6k doesn't, poopy.

Couldn't you rig it up as another set of injectors?

 

i cant see why not, i'm gonna have a go at set it up using a pair of low flowing injectors, have them wired in with the secondarys but have a pressure switch in one of the wires going to the injector

 

I have mine wired to the PWM output #4 which I designated as the turbo boost controll output , when selected a programable map becomes available in the MAPS menue . This output is especially suited to this duty as boost control is controlled by a solenoid valve also , the map maps RPM against duty cycle , I also wired in a pressure switch (in series) to keep the injector from pulsing without boost pressure , as the output will pulse once RPM is being seen by the computer and we know it is possible to slowly turn the RPM's without boosting.