Is it normal that I have to set the trigger angle to 76 degres to zero the timing ? It's far from 65. I know people sometimes set it to 67-70. I just want to be sure that it's possible before starting to tune the car.

Thanks!

 

Don't see why not...mine is 71.

James

 

All trigger angle does is change the timing without moving the CAS... Mine is set at like fiftysomething.

 

mine is also 71

 

Ok thanks guys. I just wanted to be sure everything is fine before doing hard run with the car.

 

I just zeroed one a couple of weeks ago that needed to be set to 76. My car is set at 65.

 

I wish I could check mine; my stupid timing light is not picking up the signal from the coil. I know it works, I tested on another car. It's a snap-on 5 stage too. My wires are 10mm; the pick-up barely fits over the wire. I'll figure it out. Mine is set to 77.

 

I had also some trouble with my timing light. It was not caching the signal. I played with it on the wire and it finally works.