Haltech Thanks
#1
Will work for horsepower
Thread Starter
Thanks
Just wanted to thank Claudio and Crispeed for there help, my e6k on my fd started up in no time no problems. Was able to make tunning sesion and put down 420 hp on pump. Thanks again Charlie.
#2
Originally Posted by Busted7
Just wanted to thank Claudio and Crispeed for there help, my e6k on my fd started up in no time no problems. Was able to make tunning sesion and put down 420 hp on pump. Thanks again Charlie.
Although I can't exactly remember how I helped but I'll accept your gratitude along with a check for services rendered.
Ok
Congrats on the power. How much boost were you running?
#3
Will work for horsepower
Thread Starter
It was spiking between 10-14 lbs. I had boost controller screwed up but even with the spiking it made smooth pull to 7400. and 420 hp on pump gas. Best part was ambient was 67 in the building and after 4 pulls air temps were 74. So far water temps have not gone past 180 deg. Ps you gave me advice on aem wide band and advice you give others i have put to good use. Thanks again
#4
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by Busted7
It was spiking between 10-14 lbs.... 420 hp on pump gas...