Hey guys,

Quick question... I have an E6X, and under the fuel setup, I have the staging bar number set to 10. On the 2d fuel map, when does the staging occur, ie when do the secondaries kick in? On the 10th bar, or on the 11th bar?

Thanks
Greg

 

Hmmm.... looking at the HalwinX software, I see that the 10 bar is a slightly darker blue than the first nine, so I am assuming the the staging occurs on the 10th bar, that is, the secondaries would kick on at this point in time.

For a rotary engine running primaries and secondaries, I assume that on the staging bar, you would cut your injector time to 1/2 plus a bit of the previous value (assuming that you are still running all factory 550 injectors, or all the same injectors), for the transition... Would this assumption be correct?

Thanks,
Greg

 

yup!

 

Thanks!