The plan is to run on E85, shooting for 500-600hp on a set of 1680 primary and 2400cc secondary injectors.


I've been searching the haltech forum for hours trying to find a 1600/1600 staged map to start with.

can somebody help me out here??

 

Thats a very specific map, both for timing, AND for fuel. You should probably start with a 800/1600 map and trim it down on the vacuum side.

 

What about 1600x4 how hard would that bee

 

a 1600/1600 staged map would be a good starting point, but I cant find any.

 

im running 4x1600 but with microtech is haltech that much different

 

How does microtech run their injectors. Its by Millisecond on the Haltech.

 

I have a 150lb/160lb injector map for E85. It was only tuned to 12psi though so keep that in mind. Its for a Sport 1000. Send me your email and I'll send it over.

 

I could also send you copy of mine, although it's 6x160ibs it will get you started. It's out of an E8.

 

how would I transfer a Sport 1000 map to an E6x????

 

I'm building a 4X2000cc E85/E6K map right now.

 

i have a 1000 map with 4 2200cc injectors. the car starts and drives. let me know if you want it.