i have a bad misfire with my haltech installed... im running about 13lbs of boost (which i didnt do with my stock ecu) but it seems like every couple of days my car will run like ***.... anyone else experince this... any solution to the problem?

ive replace my plugs/wires/ checked coils

running a 3.2 charge time on the coil

 

Can you datalog It?, if it shows up as a 16,000 rpm blip in the datalog, you need to ground the sheilding of the cas wiring...Max

 

ill datalog tomorrow and post when i get to work

 

hmm it wont let me upload it... how do i do this, or do i have to host it myself.... ill email it to anyone who is willing to help me

 

you have to host yourself. did you verify timing is correct

 

its showing a hit at half the rpms when it misses... like ill be full boost and 6800 rpms then it will show 3400rpms back and fourth.... Odd thing is that this dosent happen when running 10 psi, only when i try to run more? this leads me to believe its not an cas problem. The best thing I can figure from this is that im blowing out my spark... oh well unless anyone has any suggestions im gonna live with this till i get my single. maybe that will help?

 

try upgrading to the 707 firmware that fixed my misfire above 7800rpm