Ok the 'manual' has old p/n's from what I can tell and have read. It says the first 3 digits of the p/n is supposed to be stamped on the casing of the sensor but all I see is 466 on the top of the case and 9756-B2 on the underside. The damn sticker on my sensor is faded out and i can only read partial numbers 0830...242


The connector on my wiring loom is orange which the manual states is for 2/3 bar units but I want to find out if I have the 2 or 3 bar unit.


Any help?

 

The 3-bar unit has a slot that is "horizontal" pointing to the other two pins.
You cannot tell the difference between the 1-bar and 2-bar unit though...


-Ted

 

sounds like i have a three bar unit