Haltech injector current setup on e8 FD
12-30-09, 08:45 PM
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Jun 2008
Location: Tucson
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
injector current setup on e8 FD
what are mine suppose to be at?
i have stock primaries on an e8 for a FD. anyone? trying to make sure all these settings are correct
i have stock primaries on an e8 for a FD. anyone? trying to make sure all these settings are correct
12-30-09, 10:27 PM
#3
Full Member
Thread Starter
iTrader: (2)
Join Date: Jun 2008
Location: Tucson
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
hey buddy.
got jrats 1600s. as soon as i get these other ones cleaned and get a top feed ill be upgrading the primaries
jrat said we could get the car running for now though, and were just having more and more probs
got jrats 1600s. as soon as i get these other ones cleaned and get a top feed ill be upgrading the primaries
jrat said we could get the car running for now though, and were just having more and more probs
01-07-10, 01:52 PM
#4
Serbian
iTrader: (1)
Join Date: Nov 2006
Location: phoenix
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Measure impedance with ohm meter and do this calculation. I=U/R. U =12V R= is your measured impedance and this formula will give you the current. For example. R=6ohms Your current is I=12/6= 2amps.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
imitek
3rd Generation Specific (1993-2002)
9
08-28-15 05:28 PM
