I about buy a haltech, but before I do, I wanted to see if anyone is running a similiar setup.(E6X or E6K) I've seen posts like mine before, and all the stuff that is bad about getting someone elses map, so dont tell me about it again. I just really need to get my car up and running before rotary revoultion, so please understand, I'm running out of time.
My setup is this- 13BT street ported intake and exhaust, 89-91 upper and lower mani, all stock. Stock throttle body. 550cc primarys, 1600cc secondaries. TO4S 60-1 turbo, .98 exhaust about 14psi boost. Front mount intercooler.
Walbro pump, SX regulator, 43 psi base pressure
Standard ignition from TII.

If anyone can help me with something to build on, as I dont think a few days is enough for me to tune it on my own. I dont plan on boosting, just be able to drive to indi!

Thank you for any replys!

 

I think there are set ups out there somewhat similar to yours. Have you checked www.teamfc3s.org/forum/ or maybe www.nopistons.com/forums/ and see if there are some maps on there. Also there is a Haltech support list on Yahoo Groups that has some downloadable files.

 

Thanks for the info!