Haltech Hitman timming, real setting
05-20-04, 12:17 AM
#1
Hitman timming, real setting
I first set my Crank agle sensor, via hitman method with the two triggers at the screw holes (refer to hitman site for pics) and once set to the tooth offset of 11 my car didnt have correct timming at all. The correct method is a tooth offset it 3, if using the hitman CAS stab. He always sets all his maps to 11 becasue that is the factory Mazda CAS stab method. I've seen people get confused on this, but its all on his website. That is the only reason 11 doesnt work with hitman method.
So remember tooth offset 3...........Hope this helps future headaches for other newbies.
So remember tooth offset 3...........Hope this helps future headaches for other newbies.
05-20-04, 10:59 AM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,803
Received 2,577 Likes
on
1,831 Posts
last one i did i didnt touch the cas (its never been moved) and used 11 it was right on. i do know if you move the cas its different
