Haltech which haltech should i use!!
#1
Full Member
Thread Starter
Join Date: Apr 2005
Location: Dallas, TX
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
which haltech should i use!!
id like to know which haltech i would need to run on a '90 vert with a 13btt = 3rd gen motor (just so you dont get confused). anything you guys would like to share with me about this swap would be much appreciated!!!
#3
Full Member
Join Date: Jun 2007
Location: Long Beach, CA
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
If you are going to use the haltech to control the oil pump as well, get the E8, it has better control in the soft.
The e8 will also let you go full sequential ignition and injection, wearas you'll have to run batch with the E6X. The E8 Is only a little more expensive, unlike the jump from e6x to the e11v2.
The e8 will also let you go full sequential ignition and injection, wearas you'll have to run batch with the E6X. The E8 Is only a little more expensive, unlike the jump from e6x to the e11v2.
#4
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
This question has been asked plenty, its basically a comparison of the options you need vs. the budget you have.
What do you plan to do and how much can you afford to get it all done.
E6X or E8.
What do you plan to do and how much can you afford to get it all done.
E6X or E8.
Thread
Thread Starter
Forum
Replies
Last Post
Sammy Built
Haltech Forum
8
09-28-15 03:18 PM