Haltech haltech E6
Thread Starter
Banned. I got OWNED!!!
Joined: Jun 2002
Posts: 161
Likes: 0
From: nj
haltech E6
i was wondering if anyone can post a link to someone who is using this ecu or if its any good . not e6k just e6 i cant find anything about it on the haltech site thanks alot .
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
It's the predecessor for the E6X...E6k...E6S...E6A...
To run it on a rotary, it can only run in "BASIC" mode, so you need something that's trigger when the motor hits TDC.  With an FC3S, you need to take the stock CAS and grind 22 out of the 24 teeth off!!!
On top of that, the inputs need to be run through some MSD 8509's, so that adds even more money into the whole project.
This is not worth it with the current generation of Halteh ECU's, so even if someone sells you the unit for $1, run away.
-Ted
To run it on a rotary, it can only run in "BASIC" mode, so you need something that's trigger when the motor hits TDC.  With an FC3S, you need to take the stock CAS and grind 22 out of the 24 teeth off!!!
On top of that, the inputs need to be run through some MSD 8509's, so that adds even more money into the whole project.
This is not worth it with the current generation of Halteh ECU's, so even if someone sells you the unit for $1, run away.
-Ted
