I've got some base maps that I got from the hitman's site but if anyone would be so kind as to share a map that may be closer to my setup that would be great.

Here is thine setup:
Garrett 60-1
stock coils
stock CAS
550 Primarys
680 Secondays
Stock FD fuel pump (in FC though)
and so much more... but not relevant for a fuel/ign maps

Still really new that this. Just today started the car for the first time with my brand new E6K and home brewed V mount IC.

Thanks, Chris

 

You really have small injectors for a 60-1. Your going to have a hard time finding a map for stock injectors with that turbo.

 

From everything i've found, this turbo is at its best at around 14-16psi. Do you not think that my injectors will be good enough?

 

Not enough fuel at all. 60-1 will get 400whp 14-16psi.

 

It would seem even most stock turbo'd sevens upgrade their injectors for that psi. Single turbo -- your really asking for it. IIRC the stock injectors on a stock turbo max out at around 12psi.

 

I've got a friend with a wideband that is going to tune the haltech for me in the next week or so. I'll see how that goes before I go upgrading, the general consesis from the single turbo forum was i'd be ok. Well see, I'll upgrade anyday before I rebuild my motor again

 

you need a bigger fuel pump and bigger injectors

 

I only see 83% duty cycles at 12psi with all the bolt ons in my FD.
But, I agree you need bigger injectors for that turbo.

 

i found some 1600cc that i'm going to put in, just to be on the safe side. I just have to find some one to bore out my rail