Anybody have the settings for the PWM output settings to work with the stock FD gauge cluster. I have two stock FD gauges and neither works with the E8, with my settings.
I'm on the Blue w/ yellow wire on the yellow ecu plug using PWM #1 set to Tacho.

 

DId you edit the preferences for the Tach. I am running an aftermarket tach because my TII one was screwed. For the Duty I am running 12 and 4 pulses per cycle. Mine was sett 1 and 1 when I opened it up. Hope that helps.

Brad

 

Yes, I'm on 4 pulses per cycle. I'll try some settings for the Duty, Thanks.

 

Well, for whatever reason, I couldn't get the tach to work with PWM1, hooked it on PWM3 and it worked.