Haltech E6X: trailing coil problem
08-18-08, 04:26 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: Nashville, TN
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
E6X: trailing coil problem
the other day my trailing coils quit for no known reason. Car has ran fine for about a year on E6x on my turbo II fc. I switched out the trailing coils with a known good set off a running NA. Still nothing with the coils. I then measured the voltage on the connectors. The coils are getting 12v from the black/yellow wires. and 12v from both ignition drivers. When I crank the car one of the ignition wires drops the voltage rapidly (which I assume means it is working) and the other ignition wires voltage stays at around 12v.
Any suggestions on what to check. It seems as if one of the ignition wires is not working but unsure as to why or how to fix it.
Any suggestions on what to check. It seems as if one of the ignition wires is not working but unsure as to why or how to fix it.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
09-04-15 05:19 PM
