Haltech E6K C.A.S wiring
Thread Starter
Full Member
Joined: Jul 2009
Posts: 106
Likes: 1
From: ashburton new zealand
E6K C.A.S wiring
Ok i have looked and looked for info and cant find anything. I have a 1987 s4 rx7 13bt and im fitting a heltech e6k into it. I have four wires going to cas from e6k but plug is diffrent so i have to change. Can sumone tell me please what pin outputs on e6k goes to what colour wires on factory CAS on s4 13bt... please
Help please. think i have it right just didnt want to plug in incase i damaged sumthing
Help please. think i have it right just didnt want to plug in incase i damaged sumthing
talking head
Joined: Apr 2008
Posts: 2,775
Likes: 15
From: Perth, WA, OZ
umm off top of my head..
home + is green ( on e6k input ) and this is green on the CAS..
CAS white is the home ( - ) and goes to the blue wire in the ecu shielded cas wiring
.. or alternatively to the ecu black wire ..( or earth )
.. trigger + is yellow ( on e6k input )
and on the CAS this is red
and CAS white/black is ( - ) and goes to the red wire in the ecu shielded CAS wiring bundle or,,, ultimately or alternatively.. to the ECU black ( or earth )
home + is green ( on e6k input ) and this is green on the CAS..
CAS white is the home ( - ) and goes to the blue wire in the ecu shielded cas wiring
.. or alternatively to the ecu black wire ..( or earth )
.. trigger + is yellow ( on e6k input )
and on the CAS this is red
and CAS white/black is ( - ) and goes to the red wire in the ecu shielded CAS wiring bundle or,,, ultimately or alternatively.. to the ECU black ( or earth )
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
DocHoliday89
3rd Generation Specific (1993-2002)
5
Oct 12, 2015 07:42 PM
