Haltech E11 good to go
Thread Starter
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
E11 good to go
I just wanted to drop a note that with the help of Haltech Aus (Adam in particular), the revised firmware version has fixed the ignition problems we've been having with the E11 on a Kouki turbo FC3S.  The car runs pretty damn smooth in sequential mode (not possible with the prior E6K).  Full story is on the Haltech Support list on Yahoo Groups.
-Ted
-Ted
The 7 can't lose!
Joined: Feb 2002
Posts: 487
Likes: 1
From: Adelaide, South Australia
Congratulations
Well done on getting it all running, Ted...
They're having a few problems with my Series 7 still, unfortunately
It was due to go on the Dyno today, but they're having some strange timing problems at the moment..
I tried to look at the Yahoo Group you mentioned, but as I wasn't a member it won't let me in.. any idea how long it takes them to process a membership on there?
They're having a few problems with my Series 7 still, unfortunately
It was due to go on the Dyno today, but they're having some strange timing problems at the moment..I tried to look at the Yahoo Group you mentioned, but as I wasn't a member it won't let me in.. any idea how long it takes them to process a membership on there?
Thread Starter
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
The membership typical takes about a week, but it's highly dependent on the admin's free time.
If you need the firmware file, I've got it on my site...
http://fc3s-pro.com/HALTECH/
Please don't try and use the maps in there!  Those maps are from people who have asked me to look at their particular maps which they have been having problems with!
As a side note, I heard there is another "glitch" in that particular firmware.  Sorry, I don't have the particular details on what it is, but Haltech Aus is working on it with a new firmware revision which should be released soon.
I know this particular firmware fixes the ignition problems we were having, and it's good enough to have the car up and running well.  I'll drop more details once they have been announced.
-Ted
If you need the firmware file, I've got it on my site...
http://fc3s-pro.com/HALTECH/
Please don't try and use the maps in there!  Those maps are from people who have asked me to look at their particular maps which they have been having problems with!
As a side note, I heard there is another "glitch" in that particular firmware.  Sorry, I don't have the particular details on what it is, but Haltech Aus is working on it with a new firmware revision which should be released soon.
I know this particular firmware fixes the ignition problems we were having, and it's good enough to have the car up and running well.  I'll drop more details once they have been announced.
-Ted
The 7 can't lose!
Joined: Feb 2002
Posts: 487
Likes: 1
From: Adelaide, South Australia
Trailing Ignition
Ted,
Did you have any trouble getting the timing on the trailing plugs right??
PS - any chance of emailing me a copy of the notes that are on the Yahoo group, while I wait for my membership to be approved?
Did you have any trouble getting the timing on the trailing plugs right??
PS - any chance of emailing me a copy of the notes that are on the Yahoo group, while I wait for my membership to be approved?
Thread Starter
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
There's a lot of useful information that has been swapped since the release of the E11.  I would try and wait to get access as a member, as there was stuff I didn't write myself.  If you want the text I've sent to the list, I'd be happy to send it to you - drop me an e-mail address in PM.
-Ted
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
Mar 1, 2019 09:19 PM