Anyone got their 20B project running with an E-11?
I'm interested on opinions and results.

 

i'm installing one right now, if it works like the manual says it will it should be great

mike

 

We have a 20b FD here running a t04 and an e-11 v.1 and this is one of the most streetable cars I've ever driven,the results have been great although the cars only tuned to 12psi and running on 7 which is border-line scary on the streets,but everything works ,including ALL gauges,A/C ,cruise....As we speak I am wiring my car,a 13b FD with the E11 v.2,and despite the past problems with this setup,we have great anticipations for the final results.Haltech(Nathan) says they have it all worked out w/the new firmware!


Chad

 

Thanks everyone for your replies.
Hey Chad let us know how everything turns out with your car.

 

i just started mine up, it already runs a lot better than the e6k

mike

 

dick lambert recently purchased a real nice turnkey 95 fd 20b w an e11 t66. i did drive it prior to the roads being snowed in and it seemed well behaved. it was tuned in florida and may need some tweaking but was running v well before it's relocation. a disc accompanied the car... version 1.24. i have downloaded & printed the inx manual and having only worked w power fc's and dataloggit will be in the learning stages. when we get to doing a bit of tuning i will update the list. we may upgrade the turbo a bit as it should be good for 515 rwhp based on it's lbs/min.
howard coleman