Haltech Forum Area is for discussing Haltechs

Haltech base map for sinlge TB turbosetup .. input needed

Thread Tools
 
Search this Thread
 
Old 10-04-06, 03:07 PM
  #1  
Navy MarCom

Thread Starter
iTrader: (3)
 
doridori-rx7's Avatar
 
Join Date: Jul 2004
Location: On a Boat!
Posts: 812
Likes: 0
Received 0 Likes on 0 Posts
base map for sinlge TB turbosetup .. input needed

as the topic says , I've got to a single 75mm ford racing TB.. looking for some input on setting up the base map on the E6X. I've got some ideas of my own but I'm not too proud to hear from others and incorporate thier input into the base map.. if it works out well i'll add it to claudio's database.. ( if he wants it)..
Old 10-04-06, 05:12 PM
  #2  
EFI Tech Wannabe

iTrader: (1)
 
Claudio RX-7's Avatar
 
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes on 4 Posts
Well, unfortunately i dont have anything for the single throttle mod, i would love to have worked on one. Where are you from? Since ill be in the US, you wanna try and work something out?

Let me know.
Old 10-05-06, 08:29 AM
  #3  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
My setup uses probably the same throttle body that yours does, or one that is very similar. I've been tuning it a little bit over the past few weeks and it's basically the same as the progressive throttle. The only thing I've noticed is that once the A/F ratio is tuned to reasonable level for idle and cruise it wants to stumble off idle and in quick (but small) throttle transitions. Big transitions are fine. A little bit more accellerator pump cleared that right up.
Old 10-05-06, 08:42 AM
  #4  
EFI Tech Wannabe

iTrader: (1)
 
Claudio RX-7's Avatar
 
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by Aaron Cake
My setup uses probably the same throttle body that yours does, or one that is very similar. I've been tuning it a little bit over the past few weeks and it's basically the same as the progressive throttle. The only thing I've noticed is that once the A/F ratio is tuned to reasonable level for idle and cruise it wants to stumble off idle and in quick (but small) throttle transitions. Big transitions are fine. A little bit more accellerator pump cleared that right up.
Yes, that would seem logical, since the single big throttle will put more air in the motor a lot faster than the stock 3 butterfly deal. Working with the Throttle Map should make for a lot better response than the stock one too, once you have it dialed in good.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM
befarrer
Microtech
3
08-22-15 05:52 PM
stickmantijuana
20B Forum
10
08-19-15 01:47 PM



Quick Reply: Haltech base map for sinlge TB turbosetup .. input needed



All times are GMT -5. The time now is 03:17 AM.