Haltech Anyone with a datalog? Making an engine CFM calculator.
#1
Senior Member
Thread Starter
Anyone with a datalog? Making an engine CFM calculator.
Hey I am working on an engine CFM calculator that will tell the exact CFM of your engine based on injector duties and AFR. This will be useful when selecting a new turbo.
I am curious what our engines flow. So I am asking for a datalog because I dont have access to my car right now.
This will work best if you datalog a long pull in 3rd or 4th from 2k-redline. (Of course on a closed course, or dyno
If you have a datalog with this displayed:
Inj Duty
RPM
Boost
AFR (or a voltage from a wb and the chart used to convert it)
email it to: rotor_rage@yahoo.com
You must also tell me what injector sizes you are running, where your staging bar is and your static fuel pressure.
Please include a mods list: porting, exh turbo size A/R etc...
I will post the excel spreadsheet when I am done.
Justin
I am curious what our engines flow. So I am asking for a datalog because I dont have access to my car right now.
This will work best if you datalog a long pull in 3rd or 4th from 2k-redline. (Of course on a closed course, or dyno
If you have a datalog with this displayed:
Inj Duty
RPM
Boost
AFR (or a voltage from a wb and the chart used to convert it)
email it to: rotor_rage@yahoo.com
You must also tell me what injector sizes you are running, where your staging bar is and your static fuel pressure.
Please include a mods list: porting, exh turbo size A/R etc...
I will post the excel spreadsheet when I am done.
Justin
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM