I have some questions and looking for some insight and possible issue switching from adaptronics modular pnp to Haltech Elite 2500 pnp. On the adaptronics modular pnp, the smart coil direct fire triggered wire was diagnostic port signal wire, on the Haltech elite 2500 pnp it uses idle air control (BAC) wire to trigger and remap the idle air control (BAC) to use another signal wire on the Haltech adapter harness. Will I need to rewire my current existing harness engine harness? Also anyone got any detail on the trigger type using the FFE trigger wheel?

Any info or insight will help.

Thanks!

 

I figured out it. Looks like I need to move two wires around, ISC(IGN2) and IGN6 and terminate the diag wire from the diagnostic box for direct fire and retaining ISC. Also found the instruction for FFE trigger wheel setting.