PFC mounting bracket interest
03-07-16, 03:08 PM
#126
I shipped them 1st thing this morning via USPS Priority. East Coast guys should have them on 3/9 or 3/10. West coast guys 3/8 or 3/9.
I ordered a few extra and have 5 left if anyone didn't get in on the original list. PM me for details.
Thank you for your support everyone!
I ordered a few extra and have 5 left if anyone didn't get in on the original list. PM me for details.
Thank you for your support everyone!
03-10-16, 03:30 PM
#134
The black plug, not sure which one you are referring to but it may be for the fan recall box, which attaches to the other 6mm stud (uses 10mm nut) on the back side of the mount. Dale Clark did a write up about not needing it if you have changed out your coolant thermosensor to the 89-91 FC part. I had the stud installed in case some people choose to keep it.
There is a picture of the fan box and Datalogit installed to the mount on the first page of this thread. It was a prototype so I did make a few design changes vs. the version you have but the differences are minor.
Last edited by turbojeff; 03-10-16 at 03:33 PM.
03-10-16, 05:00 PM
#135
The two extra studs are for your Datalogit mounting if you use one. If you don't have one then they will just be non-used studs.
The black plug, not sure which one you are referring to but it may be for the fan recall box, which attaches to the other 6mm stud (uses 10mm nut) on the back side of the mount. Dale Clark did a write up about not needing it if you have changed out your coolant thermosensor to the 89-91 FC part. I had the stud installed in case some people choose to keep it.
There is a picture of the fan box and Datalogit installed to the mount on the first page of this thread. It was a prototype so I did make a few design changes vs. the version you have but the differences are minor.
The black plug, not sure which one you are referring to but it may be for the fan recall box, which attaches to the other 6mm stud (uses 10mm nut) on the back side of the mount. Dale Clark did a write up about not needing it if you have changed out your coolant thermosensor to the 89-91 FC part. I had the stud installed in case some people choose to keep it.
There is a picture of the fan box and Datalogit installed to the mount on the first page of this thread. It was a prototype so I did make a few design changes vs. the version you have but the differences are minor.
Awesome. Thanks for the fast reply. I'll save the small hardware when I purchase a datalogit in the future. Great thinking. I have a picture of the ecu installed in my thread. Check it out. As for the fan relay, I put it in its correct location along with the two grounding wires.
The small black plug looks like a ground as well not sure. I'll check his thread.
03-10-16, 05:19 PM
#136
Got mine today and got it installed as well. Super easy, great stuff. Can't wait to see what you have next.
One thing I noticed is I seem to be missing a bolt on the bottom that's closer to the door, you can see it in the picture. Could anyone let me know what's supposed to go there? I have a ground on the other one.
03-10-16, 08:02 PM
#137
Got mine today and got it installed as well. Super easy, great stuff. Can't wait to see what you have next.
One thing I noticed is I seem to be missing a bolt on the bottom that's closer to the door, you can see it in the picture. Could anyone let me know what's supposed to go there? I have a ground on the other one.
Thanks for the feedback, I'm happy it is working well for everyone!
It looks like you are missing one bolt that mounts the lower part of the bracket to the car. It is the same as the other on the bottom part of the bracket, 10mm head, 6mm threads, they are used all over the car if you have any "extras" laying around just throw one in there. Fish around under your carpet, someone may have dropped it and it fell under the carpet.
07-06-16, 10:06 AM
#146
Junior Member
iTrader: (1)
Join Date: Jun 2015
Location: Paris
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
1. Carpe Diem 7
2. R-R-Rx7
3. JSpek92
4. ncx94
I'm in for the rhd version, if ever it goes into production.
(shipping is for france, so dunno the price for that, but in anyway)
2. R-R-Rx7
3. JSpek92
4. ncx94
I'm in for the rhd version, if ever it goes into production.
(shipping is for france, so dunno the price for that, but in anyway)
07-07-16, 08:05 AM
#147
