FRP/Carbon Fiber parts available for FD
#152
Pistion to rotary
iTrader: (2)
Join Date: Jun 2012
Location: sioux falls
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
I asked him the other day and said had one completed and if wanted it and said heck ya. lol I think there going to be for sale very short time. The shop was on a long holiday break but should be up now or soon.
#153
These are the fitted pics for the cluster and hood, I don't plan on installing it into the car anytime soon, but from what I can tell, I will encounter a lot of problems. The whole piece is in constant tension because as shown in my original pic 3 posts ago, the two pieces don't even come close to lining up. The seam where all the pieces connect, are wavy and not straight at all. Also, the button not fitting for me just tells me that there is no quality control on this piece.
Are you going to give me a refund/replacement or will I have to bite on the bullet on this one?
It's just a little strange that a vendor doesn't know his own product and has to ask for pics from someone who purchased them. Maybe you should give me a refund and take this set I have.
If you are not satisfied with the set, you can send it back to me and I will refund you 100%. The truth is that some of the moulds I use were NOT made by me but by the workshop. I unfortunately don't have a FD available so I can't test all the products before shipping! I did sell a few of those sets and never got a feedback! That's why I continued to sell them! Now I will definitely ask the workshop what is going on and try to amend the moulds.
Answer above!
Yes workshop is back to work!!! Normal delivery time resume!!
#157
Hey,
So for people not satisfied with their interior panels, you can ship them back to me and I will refund you 100%. I am really sorry but as I sold a few, I thought they were fine but they are not!!!
Grinch thank you for the beautiful picture. I am sorry but I think I misunderstood you. When you said hood I thought you talked about the lip on top of the piece!
So for people not satisfied with their interior panels, you can ship them back to me and I will refund you 100%. I am really sorry but as I sold a few, I thought they were fine but they are not!!!
Grinch thank you for the beautiful picture. I am sorry but I think I misunderstood you. When you said hood I thought you talked about the lip on top of the piece!
#163
OK I got a few emails also inquiring for this. I do have the OEM plastic piece for the cluster surround (from which I made the mould of the blank one). I need to check if I have the other parts of the interior.
What would be awesome is that somebody provide me a complete plastic set and I could make the blank set from it! I could offer a VERY interesting discount to this person!
Let me know!
Cheers,
Marc
What would be awesome is that somebody provide me a complete plastic set and I could make the blank set from it! I could offer a VERY interesting discount to this person!
Let me know!
Cheers,
Marc
#168
Total Balance is Key
iTrader: (14)
It looks as if im getting the short end of the stick on my FRP AD9 hood. Fitment is not good. The studs were significantly off and bent via production, theres a large gap on the passenger side and the hood is too long in the front. The fitment is bad to where the hood wont close. I dont suggest purchasing this FRP AD9 hood.
#170
Hey,
I replied you by PM already. I honestly have no idea how your hood can be that bad when I sold 4 pieces in carbon fiber and everybody said that fitment is good. For the hinges, maybe you could ask a paintshop to adjust them to make the hood sits better?
I am really sorry anyway and we will continue by PM to find a solution for this.
As for the interior CF pieces, the mould for the center console is being made. I just need the OEM plastic sample of the AC panel to have the full set available so if anybody has it, I would appreciate if you could ship it over!
I replied you by PM already. I honestly have no idea how your hood can be that bad when I sold 4 pieces in carbon fiber and everybody said that fitment is good. For the hinges, maybe you could ask a paintshop to adjust them to make the hood sits better?
I am really sorry anyway and we will continue by PM to find a solution for this.
As for the interior CF pieces, the mould for the center console is being made. I just need the OEM plastic sample of the AC panel to have the full set available so if anybody has it, I would appreciate if you could ship it over!
#171
Total Balance is Key
iTrader: (14)
Hey,
I replied you by PM already. I honestly have no idea how your hood can be that bad when I sold 4 pieces in carbon fiber and everybody said that fitment is good. For the hinges, maybe you could ask a paintshop to adjust them to make the hood sits better?
I am really sorry anyway and we will continue by PM to find a solution for this.
As for the interior CF pieces, the mould for the center console is being made. I just need the OEM plastic sample of the AC panel to have the full set available so if anybody has it, I would appreciate if you could ship it over!
I replied you by PM already. I honestly have no idea how your hood can be that bad when I sold 4 pieces in carbon fiber and everybody said that fitment is good. For the hinges, maybe you could ask a paintshop to adjust them to make the hood sits better?
I am really sorry anyway and we will continue by PM to find a solution for this.
As for the interior CF pieces, the mould for the center console is being made. I just need the OEM plastic sample of the AC panel to have the full set available so if anybody has it, I would appreciate if you could ship it over!
#172
Senior Member
iTrader: (20)
For whatever is worth, I can also vouch for Marc. He is a stand up guy and honest seller.
I received a full refund for the carbon fiber interior parts. In the future I will not hesitate to deal with him again.
There are not many carbon fiber vendors out there with a good track record.
I received a full refund for the carbon fiber interior parts. In the future I will not hesitate to deal with him again.
There are not many carbon fiber vendors out there with a good track record.
#173
Yes honestly I am really annoyed when I hear that my parts are not fitting. For Miatas, I don't have this problem as I made the moulds myself and test the fitment of the parts on my NA and NB before they are released so I know for sure that the fitment will be spot on.
I unfortunately don't have a FD in Shanghai (I think there are less than 3 in the whole China and they go for crazy prices - 60000 USD or so) so for all those parts I need to make the moulds and send parts for testing before I can actually sell them (still waiting for Grinch to let us know if the blank cluster gauge is ok or not!).
Anyway, thanks for still trusting me! The full black interior panels set will be done soon! As soon as I can get my hands on the AC panel!
Marc
I unfortunately don't have a FD in Shanghai (I think there are less than 3 in the whole China and they go for crazy prices - 60000 USD or so) so for all those parts I need to make the moulds and send parts for testing before I can actually sell them (still waiting for Grinch to let us know if the blank cluster gauge is ok or not!).
Anyway, thanks for still trusting me! The full black interior panels set will be done soon! As soon as I can get my hands on the AC panel!
Marc