Custom Solenoid Rack
01-28-12, 11:15 PM
#379
My suggestion is, read the vacuum diagram I provided carefully. Route directly from the solenoid to the valve OR the metal tubing directly to the valves.
This job should be VERY easy once the ratnest is totally removed because you basically connect straight from solenoid to the valves.
-EZ
02-01-12, 07:59 AM
#382
Up the Irons
Join Date: Oct 2008
Location: Oki, Japan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Hey Knights, I want to buy this! Is there a group 5 in the works? I saw the total price on the first page, then read later in this thread that it went up a bit due to an increase in parts cost for you, also with the adition of extra features. I know there's a $200 up front deposit but what's the grand total come out to now?
02-01-12, 11:10 AM
#383
Hey Knights, I want to buy this! Is there a group 5 in the works? I saw the total price on the first page, then read later in this thread that it went up a bit due to an increase in parts cost for you, also with the adition of extra features. I know there's a $200 up front deposit but what's the grand total come out to now?
Right now, I am ONLY selling the kit with the PnP harness since everyone opted for that option and I had order extra harnesses just in case. Therefore the price + PnP harness is now $632.54 + shipping + paypal fee (shipping within us lower 48 states is 12 flat rate from USPS)
If you have any questions, feel free to let me know.
Just a note: Someone has tried to order the solenoids individually from Fabco-Air and they've been quoted $150 each solenoid. Therefore I think I am offering a great deal for what this kit is worth. Feel free to shoot me an email/PM if you have any questions, however I will NOT be offering merely the solenoid itself. Thank you all for your interest.
Cheers,
Eric Zheng
02-01-12, 06:59 PM
#384
Junior Member
Join Date: Nov 2011
Location: Ottawa Ontario
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I'll get the 5th Group Buy started, hopefully 4 more join shortly as I already have my fd prepped and the vac lines to do it all!
GB#5
1. fd3sRex7
2.
3.
4.
5.
- Zac
GB#5
1. fd3sRex7
2.
3.
4.
5.
- Zac
02-03-12, 11:04 AM
#389
****UPDATES****
GB#4
The solenoids are in, now I hope I have time to finish them today. If not, ya'll will have your tracking numbers by noon tomorrow.
SpAm@FC : I will be shipping your solenoid kit + the extra 8 pin connector next week since I did not receive the connector yet. I had to order extra 5 harnesses to get the 8 pin connectors in. Otherwise they cost much more than what I've quoted you. I ask for your understanding. Thanks!
-Eric Zheng
GB#4
The solenoids are in, now I hope I have time to finish them today. If not, ya'll will have your tracking numbers by noon tomorrow.
SpAm@FC : I will be shipping your solenoid kit + the extra 8 pin connector next week since I did not receive the connector yet. I had to order extra 5 harnesses to get the 8 pin connectors in. Otherwise they cost much more than what I've quoted you. I ask for your understanding. Thanks!
-Eric Zheng
02-03-12, 12:46 PM
#391
Hi Eric!
No problem, thanks for the info and your awesome customer service!
No problem, thanks for the info and your awesome customer service!
****UPDATES****
GB#4
The solenoids are in, now I hope I have time to finish them today. If not, ya'll will have your tracking numbers by noon tomorrow.
SpAm@FC : I will be shipping your solenoid kit + the extra 8 pin connector next week since I did not receive the connector yet. I had to order extra 5 harnesses to get the 8 pin connectors in. Otherwise they cost much more than what I've quoted you. I ask for your understanding. Thanks!
-Eric Zheng
GB#4
The solenoids are in, now I hope I have time to finish them today. If not, ya'll will have your tracking numbers by noon tomorrow.
SpAm@FC : I will be shipping your solenoid kit + the extra 8 pin connector next week since I did not receive the connector yet. I had to order extra 5 harnesses to get the 8 pin connectors in. Otherwise they cost much more than what I've quoted you. I ask for your understanding. Thanks!
-Eric Zheng
02-04-12, 04:49 PM
#392
**** UPDATES ****
Guys in GB#4, I apologized as I can not send out the kits today on time and all the USPS closes at 3pm which is approximately 10 minutes away. Something came up as I couldnt get them finished on time.
However I swear that it will get send out first thing Monday morning. Thank you for your patience once again!
-Cheers,
Eric Zheng
Guys in GB#4, I apologized as I can not send out the kits today on time and all the USPS closes at 3pm which is approximately 10 minutes away. Something came up as I couldnt get them finished on time.
However I swear that it will get send out first thing Monday morning. Thank you for your patience once again!
-Cheers,
Eric Zheng
02-06-12, 04:01 PM
#393
**** UPDATES ****
GB#4
1. crossblaim - CJ 153 101 410 US (USPS International Flat Rate shipping)
2. SpAm@FC - will ship when 8 pin connector arrives
3. TinMan09 - 9405 5036 9930 0400 6689 39 (USPS Flat Rate Shipping)
4. fc/fd - Awaiting for hoses so I can install the kit on the car for you
5. espen626 - CJ 153 102 185 US (USPS International Flat Rate shipping)
GB#4
1. crossblaim - CJ 153 101 410 US (USPS International Flat Rate shipping)
2. SpAm@FC - will ship when 8 pin connector arrives
3. TinMan09 - 9405 5036 9930 0400 6689 39 (USPS Flat Rate Shipping)
4. fc/fd - Awaiting for hoses so I can install the kit on the car for you
5. espen626 - CJ 153 102 185 US (USPS International Flat Rate shipping)
02-08-12, 10:36 AM
#398
I usually get them out within 4 week period after I receive last payment from the GB member. So far, fingers crossed. I have been able to get them out on time OTHER than X'mas which was about 3-5 days (approximately) late due to delayed shipping.
-Eric
Last edited by AzEKnightz; 02-08-12 at 10:44 AM.