Aluminum Gas Pedals GB # 3 (interest)
#176
Banned. I got OWNED!!!
iTrader: (7)
Thank for the OVERWHELMING support guys!
I'm so glad Matt at LevyRotorCrop entrusted us to put this back into production because obviously, you guys shared Matt's vision of how the car was SUPPOSED to be from the factory.
Just to update, we are IN PRODUCTION. We are cutting, and grinding, and welding, and media blasting and, and, and... you get it!
We are also photographing, and I wanted to share with you some glamor shots from this last shoot.
GAS PEDAL
DEAD PEDAL
DRIVE-BY-WIRE
We are running on schedule and hoping to have these in hand in ~30 days or so and being shipping after that.
Again - THANK YOU for everything and tell a friend, follow us on social media tag us in a post! We need all the help we can get!
I'm so glad Matt at LevyRotorCrop entrusted us to put this back into production because obviously, you guys shared Matt's vision of how the car was SUPPOSED to be from the factory.
Just to update, we are IN PRODUCTION. We are cutting, and grinding, and welding, and media blasting and, and, and... you get it!
We are also photographing, and I wanted to share with you some glamor shots from this last shoot.
GAS PEDAL
DEAD PEDAL
DRIVE-BY-WIRE
We are running on schedule and hoping to have these in hand in ~30 days or so and being shipping after that.
Again - THANK YOU for everything and tell a friend, follow us on social media tag us in a post! We need all the help we can get!
#177
Sent multiple PMs about combining order with an order I already placed in april that has not shipped yet....I havent heard back from anyone. Maybe this will help get a response.
thanks
thanks
#178
Rotary Enthusiast
Thread Starter
What user name are you sending PM’s to? my LevyRotorCorp username is not active right now. We will make sure to take care of it.
Thanks!
Matt
#179
Banned. I got OWNED!!!
iTrader: (7)
okiedoke sent an email after this post that was responded to within hours (minutes?). This specific message was missed - but his pedals will be shipped along with his custom floor mats in order to save on shipping.
Email is by far the best communication tool for orders placed in the website.
#181
Banned. I got OWNED!!!
iTrader: (7)
We are aiming for the next two weeks!
A few samples that were good enough for production were sent out to some influencers and some of the DBW pedals were delivered as they didn't require welding.
However, the bulk (i.e. EVERY other order) should ship by mid-July.
A few samples that were good enough for production were sent out to some influencers and some of the DBW pedals were delivered as they didn't require welding.
However, the bulk (i.e. EVERY other order) should ship by mid-July.
The following 4 users liked this post by garage alpha:
The following users liked this post:
Macer (07-20-20)
#183
Banned. I got OWNED!!!
iTrader: (7)
Thanks for the photos!
All orders should be shipped with a few exceptions (check your emails).
We have SOME left overs if you still want to jump in!
- WIDE Accelerators
- LHD Dead Pedals
- RHD Dead Pedals
- Normal DBW Accelerators
Everything else is out of stock at the moment.
Thanks for all your patience and support guys!
All orders should be shipped with a few exceptions (check your emails).
We have SOME left overs if you still want to jump in!
- WIDE Accelerators
- LHD Dead Pedals
- RHD Dead Pedals
- Normal DBW Accelerators
Everything else is out of stock at the moment.
Thanks for all your patience and support guys!
The following users liked this post:
Macer (07-20-20)
#186
My first ever group buyand I am very pleased with my purchase. Its a shame I will be stepping on it lol. I am coming after the garage alpha mats next. There is lots of happy people on web talking about their high quality rugs
The following users liked this post:
Macer (07-27-20)
#188
Installed!
Gas pedal feels a little jiggly. Might be a small differences in diameter between the push pin that holds the pedal. Regardless, everything is top quality and looks super nice
#189
Rotary Enthusiast
Still have wide pedal in stock? ..... I guess I could call or check the website
#190
Rotary Enthusiast
Thread Starter
I hope overall you are still happy with it!
Matt
#191
Rotary Enthusiast
Thread Starter
I am no longer making or selling these but we partnered with Matt Gold from Garage Alpha and I believe he still has in stock 👍
https://garagealpha.com/collections/...tyle-gas-pedal
Hope that helps and feel free to PM me with any questions.
Matt
#192
Sorry to hear about the sloppiness in your pedal. I have noticed that some of the plastic pivot pins exhibit some wear that would contribute to slop. also this is my first time doing a production product and I very well may have made the machining tolerances too loose. you may be able to wrap a piece of paper or something around the pin to tighten it up.
I hope overall you are still happy with it!
Matt
I hope overall you are still happy with it!
Matt
I should note that once I actually drove it, you cannot feel any slop with your foot.
It was only when I was down there in the footwell deliberately wiggling it with my hand doing a rigidity test.
OVERALL VERY HAPPY!!
Thank you!
Thread
Thread Starter
Forum
Replies
Last Post