fd3s1128

What kind of coolant do you guys use for your FD? do you guys use coolant mix up with water? because i have my FD running at 150 degree for my radiator, i need to cool down my FD

thanks

TainoIndian

iTrader: (4)

(i have a FD) preston for like 3 and half years with no problems with temps. i always drain the coolant every yr also

tjgosurf

if you know what you are doing and are a really into your own car maintence. summertime i flush my system out and run nothing but water with some anti-rust additive.

cewrx7r1

iTrader: (2)

In Houston: 25% Dexcool, 75% distilled water, 1 bottle Redline Water Wetter, PFC set at 86,86,88C, fan mod switch, M2 aluminum radiactor, Mazdaspeed replica hood, and original Mazda cooling system cap.

Runs 183 - 186F normally out of the thermostat.
About 190F under long term boost.

Tom93R1

iTrader: (2)

You are running 150 what? 150F is too cool by far, 150C and your engine is toast by now.

I run Evans. No water, 0psi pressure cap, never needs flushed, expensive as hell to replace when you do get a leak...

WaLieN

I use Prestone as well, 25% Prestone/75% distilled water/1 bottle of water wetter.

weaklink

evans...