Testing for boost leak
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Oct 2008
Location: North Bay,Ontario,Canada
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Testing for boost leak
Hey guys need a bit of help,Ive got a TII s5 and doesnt seem to bulid boost as well as it use to,so I used a schrader valve and test cap but am unable to achive any pressure I can hear it leaking out instantaly,I removed the tmic and retested at the throttle body with the same result,it sounds as if its under the uim but is there a chance that the rotor have to be in a specific position so it will not leak straight out the exhaust? Thanx Chad
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
It should not bleed off that fast Chad.
If you look at the S5 TII lower manifold(inner side,near the injector bungs) you will see a hose that runs across the Injector bleeds.It could be that..(just a guess)
try that.
If you look at the S5 TII lower manifold(inner side,near the injector bungs) you will see a hose that runs across the Injector bleeds.It could be that..(just a guess)
try that.
#4
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM