T56 bellhousing adapter
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: australia
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
T56 bellhousing adapter
in trying to locate an adapter that will allow me to bolt an 86-91 bell housing to a gm T56 gearbox
i did a search and found a few threads related to the topic, but none seemed to indicate where one was available.
i did find the link to a t5 adapter, however i dont want to use a t5
im not quite sure why this isn't a more popular topic. when the standard gearbox's really are quite poor, and a full racing item like a gforce is going to be 3-4 times the price and not ideal for street use.
i can see this being a very popular conversion with the right kit
i did a search and found a few threads related to the topic, but none seemed to indicate where one was available.
i did find the link to a t5 adapter, however i dont want to use a t5
im not quite sure why this isn't a more popular topic. when the standard gearbox's really are quite poor, and a full racing item like a gforce is going to be 3-4 times the price and not ideal for street use.
i can see this being a very popular conversion with the right kit
#2
Junior Member
Thread Starter
Join Date: Dec 2008
Location: australia
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
p.s ive found the quicktime item
however i want to fit it to a turbo II (series 4/5). But that bell housing requires a 92+ starter motor apparently, would it also require a change in flywheel and clutch assembly
then what about spigot sizing and input shaft length?
however i want to fit it to a turbo II (series 4/5). But that bell housing requires a 92+ starter motor apparently, would it also require a change in flywheel and clutch assembly
then what about spigot sizing and input shaft length?
#3
talking head
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Group Buy & Product Dev. FD RX-7
8
10-04-15 06:07 PM