General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

Shaking Engine at low RPMs

Thread Tools
 
Search this Thread
 
Old 09-22-02, 11:11 PM
  #1  
Senior Member

Thread Starter
 
enigma32's Avatar
 
Join Date: Sep 2002
Location: Central New York
Posts: 686
Likes: 0
Received 0 Likes on 0 Posts
Shaking Engine at low RPMs

Hey everybody.

I have an '81 RX-7.

Bought it from a guy who attempted to rebuild the carb unsuccessfully, and could subsequently not get it running.

I got the carb working and put an exhaust on the car... but it's having some problems.

The most severe problem is that, when under load, the engine causes the car to shake back and forth as you accelerate or decelerate (and sometimes just as you cruise) in low RPMs.

This problem disappears at high RPMs.

The choke seems to even it out...


Anybody have any thoughts?

Thanks a lot,

Matt
Old 09-24-02, 12:32 PM
  #2  
Why am I here ?

 
hugues's Avatar
 
Join Date: May 2002
Location: Boston, MA
Posts: 671
Likes: 0
Received 0 Likes on 0 Posts
Here are my thought what it is worth

Does it idle like crap ? Have you checked engine compression lately ?

what about engine mounts ? Are they any good ?

Hugues -
Old 09-25-02, 07:58 PM
  #3  
SpAz!

 
Pedestrian X's Avatar
 
Join Date: Jun 2002
Location: CA
Posts: 1,134
Likes: 0
Received 1 Like on 1 Post
id guess a vacuum leak.. does it seem to smooth out aroudn 3-4K? more info..
Old 10-01-02, 11:08 AM
  #4  
Full Member

 
blu_gxl's Avatar
 
Join Date: Feb 2002
Location: rock me amadeus...
Posts: 230
Likes: 0
Received 0 Likes on 0 Posts
check your engine mounts but, it sounds like low compression on the rear rotor. you can try ATF trick that sometimes restores some compression.
Old 10-10-02, 11:31 PM
  #5  
von
Rotary Freak

 
von's Avatar
 
Join Date: Dec 2001
Location: sandiego, ca
Posts: 2,941
Likes: 0
Received 1 Like on 1 Post
Well it can also be intake leaks. I just fixed my messed up idle after 2 years of pain and agony of not nowing what it was. First I took all the manifolds off and replaced all the gaskets and vacume hoses. After this the engine was much quieter but still shook a little. Next I turned the butterfly screw to close the butterflies a little because it was at 1000. Then I readjusted the TPS recet the ecu then took it for a spin and now my S-AFC reads only a 30 rpm difference up and down. Very smooth and nice tone as well. FINALLY.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM



Quick Reply: Shaking Engine at low RPMs



All times are GMT -5. The time now is 11:25 PM.