General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

Runs the engine good or not?

Thread Tools
 
Search this Thread
 
Old 01-08-12, 10:43 AM
  #1  
Junior Member

Thread Starter
 
zerocool261's Avatar
 
Join Date: Feb 2010
Location: Germany
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Runs the engine good or not?

HI,

I will buy a RX-7 FD again.
But i will ask you, about the engine.
Is the engine still good or not?

I have get a video from the start and run from the engine.
Here on youtube


Specs from the engine:
26t km (16t miles)
August 2011 compression test:
front: 6.9bar(690 kPa), 6.7bar(670 kPa), 6.7bar(670 kPa) bei 257 U/min
rear: 7.2bar(720 kPa), 6.9bar(690 kPa), 7.2bar(720 kPa) bei 256 U/min
Is that ok or not?

RE-Worx Uk has make the ECU tuning
It has 261 KW(355 PS)(350 HP) with the twins.

another Mods:
street ported
850cc injection nozzle
bigger fuel pump
3" Downpipe without a Cat and a KAKIMOTO Exhaust
Oil Catch Tank
AEM IC
bigger Waterradiator
Greddy Pulleys
AST removed
Secondary Air Pump removed
Apexi Power FC with controller


when the rpm fall down in the video, is that because the secondary air pump are removed?
Sry for my bad english.

Thanks for all.

Greets from Germany
Marvin
Old 01-08-12, 11:22 AM
  #2  
******

iTrader: (7)
 
flaco's Avatar
 
Join Date: May 2009
Location: miami
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
sounds good!! test drive it and see
Old 01-08-12, 11:41 PM
  #3  
Junior Member

Thread Starter
 
zerocool261's Avatar
 
Join Date: Feb 2010
Location: Germany
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
thank you.
And the compression is ok? or is it a bit low?
Old 01-09-12, 02:07 PM
  #4  
Mr. Links

iTrader: (1)
 
Mahjik's Avatar
 
Join Date: Aug 2001
Location: Kansas City, MO
Posts: 27,595
Received 40 Likes on 26 Posts
The compression is not great, but it's not horrible. It's basically around 100 PSI . If it was below 90 PSI, I'd say you'd need to budget for a rebuild.
Old 01-09-12, 09:17 PM
  #5  
F'n Newbie...

iTrader: (6)
 
fendamonky's Avatar
 
Join Date: Sep 2006
Location: Nokesville, Va
Posts: 3,928
Received 313 Likes on 228 Posts
350whp from RE:worx's dyno are VERY strong power numbers! If I remember correctly I was only making about 340whp on their dyno when I had BNR Stage 3 twins at about 1.1-1.2bar.
Old 01-10-12, 12:52 PM
  #6  
Junior Member

Thread Starter
 
zerocool261's Avatar
 
Join Date: Feb 2010
Location: Germany
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Mahjik
The compression is not great, but it's not horrible. It's basically around 100 PSI . If it was below 90 PSI, I'd say you'd need to budget for a rebuild.
Thank you. Thats help a lot.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Wolf_
Single Turbo RX-7's
3
08-11-15 04:23 PM



Quick Reply: Runs the engine good or not?



All times are GMT -5. The time now is 11:19 AM.