Running Rich
09-23-02, 07:27 PM
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: Johnson City, TN.
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Running Rich
I have an 88 turbo I just rebuilt. The motor seems fine except it keeps fouling plugs and will not start after it warms up. It will start fine when it cools down. What would cause this problem? Would the fast idle cam adjustment cause this prblem? If not what would??? PLEASE HELP!!!
09-23-02, 07:56 PM
#2
Major RX-7 Withdrawals
Join Date: Mar 2002
Location: Moreno Valley, CA
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
If it won't start when warm it might be flooding due to leaky injectors. That might also be the cause of the fouled plugs if the engine keeps flooding.
09-24-02, 12:23 PM
#3
Why am I here ?
Join Date: May 2002
Location: Boston, MA
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Most likely, the injectors are leaking.
Other possible causes:
-bad water thermo sensor (in back of water pump)
If working correctly, enrichens mixture + hike idle to 1,200 rpms when cold)
-bad bac valve (supposed to let maximum air when starting a hot engine)
Hugues -
Other possible causes:
-bad water thermo sensor (in back of water pump)
If working correctly, enrichens mixture + hike idle to 1,200 rpms when cold)
-bad bac valve (supposed to let maximum air when starting a hot engine)
Hugues -
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
03-11-19 05:34 PM
jetlude
Single Turbo RX-7's
4
08-18-15 04:53 PM