rotary noob
#1
Full Member
Thread Starter
Join Date: Apr 2005
Location: columbus ohio
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
rotary noob
Just like the tittle says. Im a noob to the rotary but im learning fast ( picking up 3rd gen rx7 friday ) and i hope i can carry my knowledge of performance over from owning my dsm. And of course i have a few questions.
1. After reading up and such, i see that the power fc is a popular ecu upgrade. So my question is, is the stock ecu limited that much that i need to buy the power fc or am i able to throw a piggy back such as an afc?
2. Also i cant find much info on how much i can max out the stock twins. Like how much boost i can run with them with the proper supporting mods befor im blowing hot air and they are operating out of their effiency range.
3. And last but not least, the dumb question, when doing an oil change, how muny quarts of oil does the roarty it take
1. After reading up and such, i see that the power fc is a popular ecu upgrade. So my question is, is the stock ecu limited that much that i need to buy the power fc or am i able to throw a piggy back such as an afc?
2. Also i cant find much info on how much i can max out the stock twins. Like how much boost i can run with them with the proper supporting mods befor im blowing hot air and they are operating out of their effiency range.
3. And last but not least, the dumb question, when doing an oil change, how muny quarts of oil does the roarty it take
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM